EN

LIB

ไม่ได้ทดสอบตัววัสดุ แต่ทดสอบสภาวะที่ชิ้นงานต้องทน — อุณหภูมิและความชื้น ช็อกความร้อน โอโซน ละอองเกลือ UV และการกันน้ำกันฝุ่น

  • IEC 61215
  • IEC 61730
  • IEC 62804
  • IEC 61646
  • UL 1703
  • JIS C8990
  • IEC 60068
  • IEC 60749
ประเทศนำเข้า
จำนวนรุ่น86 เครื่อง
บริการสอบเทียบและซ่อมบำรุงโดย CG

การเสื่อมสภาพและความทนทาน

50 รายการ
IEC 61215
85°C 85%RH Constant Climate Chamber

85°C 85%RH Constant Climate Chamber

Reliability Testing for PV Modules | Compliant with IEC 61215 & IEC 61730 | Damp Heat Test In the solar industry, long-term durability is non-negotiable. The 85°C 85%RH constant climate chamber is engineered specifically for the Damp Heat (DH) Test(high-temperature and high-humidity environment) , simulating extreme tropical environments to evaluate a PV module's resistance to delamination, moisture ingress, thermal stress and material aging during long-term use. Designed for continuous operation of 1000 to 2000 hours , our chambers provide the rock-solid stability required by global certifica

ASTM G151
ASTM G151 G155 Xenon Light Radiation Exposure Test Machine

ASTM G151 G155 Xenon Light Radiation Exposure Test Machine

The ASTM G151 G155 Xenon Light Radiation Exposure Test Machine is a full-spectrum solar aging simulator engineered to reproduce long-term outdoor environmental stress within a controlled laboratory cycle. Using a 4500W water-cooled xenon arc lamp, programmable irradiance from 35–150 W/m² , black panel temperature 35–85℃ , and moisture control from 50%–98% RH , it replicates the combined impacts of UV photolysis, infrared thermal expansion, condensation, hydrolysis, and temperature fatigue. Unlike color-focused fading chambers, this machine emphasizes material stability, structural displacement

EN 12390
CO₂ Carbonation Curing Chamber Automation Kit

CO₂ Carbonation Curing Chamber Automation Kit

Intelligent Environmental Control for Concrete Carbonation Research The CO₂ Carbonation Curing Chamber Automation Kit form LIB industry is designed to open a greener future for concrete research. It is specifically developed for CCUS (Carbon Capture, Utilization and Storage) studies, low-carbon concrete development, and carbonation depth testing. With this kit, a standard temperature and humidity curing chamber can be easily upgraded into a high-precision CO₂ carbonation curing system.

ASTM B117
Combined Salt Spray and Climate Test Chamber

Combined Salt Spray and Climate Test Chamber

High-Performance Combined Salt Spray and Climate Test Chamber with Explosion-Proof System The Combined Salt Spray and Climate Test Chamber is an all-in-one environmental simulation system engineered for demanding automotive, electronics, and aerospace testing. By integrating a full-capability salt spray system into a standard vertical climatic chamber footprint, this advanced unit allows you to conduct complex cyclic corrosion tests (Salt Spray, Drying, Humidity, and Condensation) in a single continuous program without moving the specimens. Equipped with an industrial-grade Explosion-proof Win

ISO 14965
Cryogenic Chamber

Cryogenic Chamber

LIB industry Cryogenic Chamber adopts a high-performance mechanical refrigeration system and delivers stable deep cryogenic testing down to -120°C . The system is engineered for continuous, repeatable operation at ultra-low temperatures, ensuring reliable performance and energy-efficient operation under demanding test conditions. Throughout extended low-temperature holding and temperature recovery processes, the chamber maintains excellent temperature stability and control accuracy .

IEC 61215
Damp Heating Chamber for PV Modules

Damp Heating Chamber for PV Modules

Damp heating chamber for pv modules is used to test the long-term weather resistance of photovoltaic modules, simulate high temperature and high humidity environment (wet heat 85℃/85%RH) to accelerate the aging process, complies with IEC 61215 / IEC 61730 and other standards. Through the simulation of high temperature and high humidity environment, it is used to evaluate the reliability and durability of photovoltaic panels in harsh weather conditions such as tropical and humid. Model: DHPV-04,PV-04 Standard: ,IEC 62804,IEC 61215,IEC 61646,IEC 61730,UL 1703,JIS C-8990,C-8991,C-8917,C-8938

ISO 6988
H2S Corrosion Chamber

H2S Corrosion Chamber

H2S corrosion chamber creates a single H2S gas 10 ~ 100ppb ± 20ppb(adjustable) space.The change of temperature and humidity has a great influence on the corrosion of H2S and the wide range of temperature ranging from 15 ℃ to 100 ℃ and humidity ranging from 30% to 98% RH broadens the possibility of H2S material corrosion test. Diverse models including standard and custom H2S corrosion chamber are available.Shortened lead time and 3-year long full machine warranty, contact us for solutions and quotes. Model: GC-100, GC-225, GC-500, GC-800, GC-1000 Standard: ISO 6988, ISO 3231, DIN 50018, ASTM G8

ASTM D4169-16
High Low Temperature Test Chamber

High Low Temperature Test Chamber

The high low temperature test chamber is used to test the reliability of products in high and low temperatures.The parts and materials of related products are tested for cyclic changes of high temperature and low temperature (alternating). The rising and cooling rate of 5℃/min can meet the high and low temperature alternating environment required by the test piece.Temperature range: from -20℃, -40℃, -70℃ (3 low temperature types) to +150℃. Model: TR5-100, TR5-225, TR5-500, TR5-800, TR5-1000 Standard: AAMA501, ASTM D4169-16, IEC 61215, IEC 61646, IEC61108, IEC62688, MIL-STD-811D,SAE J575

ASTM D4169-16
Humidity Calibration Chamber

Humidity Calibration Chamber

LIB Humidity Calibration Chamber provides a stable and uniform environment for calibrating temperature and humidity sensors, hygrometers, data loggers , and other measuring instruments.Available in 50L and 80L volumes, it provides a space-saving solution for laboratories and quality control departments with limited installation space. With temperature ranges down to -70°C and up to +150°C , and humidity control from 20%RH to 98%RH , the climate calibration chamber can generate stable environmental conditions for calibration across a wide range of operating points. Equipped with a high-accuracy

ISO 188
Hydrolysis Aging Test Stability Chamber

Hydrolysis Aging Test Stability Chamber

The Hydrolysis Aging Test Stability Chamber is an environmental simulation system engineered to reproduce moisture-driven material degradation mechanisms under tightly controlled temperature and humidity conditions. Rather than simple damp heat exposure, the system focuses on long-duration hydrolysis aging , where heat, water vapor, and time jointly accelerate polymer chain scission and physical property decay. Typical conditions such as 70 °C / 95% RH for 168 hours or longer are maintained with high stability to evaluate changes in tensile strength, elongation at break, tear resistance, surfa

JESD 22-A104
Temperature Cycling Chamber

Temperature Cycling Chamber

JESD22-A104 Temperature Cycling Chamber for Semiconductor Reliability Testing LIB Industry JESD22-A104 temperature cycling chambers are designed for semiconductor devices, electronic components, PCB assemblies, and automotive electronics reliability testing. The thermal cycling chambers simulate repeated thermal stress to reveal solder joint fatigue, package cracking, delamination, and other failure modes before products enter the market. ✔ 100% compliant with JESD22-A104 Conditions A–M ✔ Temperature ramp rates up to 10°C/min–15°C/min ✔ Temperature fluctuation ≤ ±0.5°C ✔ Temperature uniformity

Temperature & Humidity Chambers
Laboratory Test Chamber

Laboratory Test Chamber

The laboratory test chamber enables controlled simulation of temperature and humidity environments , supporting a wide range of reliability, aging, and stability tests. From electronics, aerospace to automotive, photovoltaics and materials science, this test chamber provides a stable testing platform for evaluating the performance of products under extreme high and low temperatures, humidity or thermal cycling conditions . By reproducing natural and accelerated climate conditions, the laboratory test chamber ensures the reliability of products during the research and development, quality assur

IEC 62804
PV Test Chamber

PV Test Chamber

PV Module Environmental Test Chamber | IEC & UL Standard Compliant The PV Test Chamber is designed for environmental reliability testing of photovoltaic (PV) products, including solar cells and photovoltaic modules. It simulates real-world climatic conditions to evaluate long-term performance, durability, and safety under accelerated stress conditions. The system is capable of precisely controlling temperature from -60℃ to +100℃ and relative humidity from 20% to 98% RH , enabling comprehensive climate simulation for PV product qualification and research.To meet advanced testing requirements, o

ASTM B117
Salt Fog and SO2 Corrosion Chamber

Salt Fog and SO2 Corrosion Chamber

LIB Industry salt fog & SO₂ corrosion chamber delivers a comprehensive, one-stop solution for corrosion testing under combined salt spray, SO₂ gas, temperature, and humidity conditions . Engineered for precision, stability, and repeatability , it allows researchers and engineers to simulate harsh environmental conditions that products may encounter in real-world applications. Ideal for automotive parts, electronic devices, metal alloys, coatings, and industrial materials , it ensures consistent, repeatable results while maintaining high safety standards and environmental compliance .

IEC 60529
Salt Water Immersion Test Device

Salt Water Immersion Test Device

The salt water immersion test device is specifically designed to evaluate the waterproof and anti-corrosion performance of PV modules, batteries and various electronic components. This test device features a large rectangular test tank (customizable in size) that can meet the full immersion requirements of entire photovoltaic modules and long battery packs. It comes standard with a commonly used 5% (w/v) salt water solution, but can also be flexibly configured with acid, alkali solutions, cleaners or anti-rust agents and other media.

ASTM G151
Simulation Xenon Exposure Aging Test Equipment

Simulation Xenon Exposure Aging Test Equipment

Designed for laboratories that demand authentic outdoor aging reproduction, the Simulation Xenon Exposure Aging Test Equipment by LIB industry transforms controlled xenon radiation into a full-spectrum degradation platform. Its 4500W water-cooled xenon lamp delivers stable 35-150 W/m² irradiance with ±0.5% control accuracy , covering UV–VIS–IR wavelengths. Environmental conditions are precisely regulated with BPT 35 ～ 85 ℃ , 50–98% RH , and programmable light, spray, and dark cycles.

ISO 6988
SO2 and Humidity Temperature Chamber

SO2 and Humidity Temperature Chamber

LIB SO2 and humidity temperature chamber cam create a corrosive SO2 gas environment with temperature and humidity can be precisely controlled,so as to observe and evaluate the performance changes of the sample in this simulated harsh environment.A complete exhaust system keeps your workplace safe and clean. 1-30PPM SO2 concentration with wide temperature and humidity ranges:respectively are 15 ℃ ~ 80℃ and 30% ~98%RH make it possible to simulate many kinds of integrated SO2 environment.Various models and customized SO2 and humidity temperature test chambers are available. Model: SO-100, SO-225,

ASTM D4169-16
Stability Chamber

Stability Chamber

The LIB Industry Stability Test Chamber is a precision-engineered solution for long-term storage and rigorous environmental testing of pharmaceuticals, materials, and sensitive products. Available in a full spectrum of sizes—from compact benchtop units to spacious walk-in rooms—these chambers are designed to meet the demanding requirements of laboratories and production facilities alike. With advanced temperature and humidity control systems, they ensure reliable, repeatable results under a wide range of environmental conditions.

IEC 60068-2-38
Temperature Humidity and CO₂ Test Chamber

Temperature Humidity and CO₂ Test Chamber

The temperature humidity and CO₂ test chamber is a device that combines 0% to 20% concentration CO2 gas on the temperature and humidity test chamber. It is used for testing products, materials or biological samples under the combined control of temperature (-60℃ to +150 ℃), humidity (10% to 98% RH) and CO2 concentration.Widely used in electronics and materials testing to evaluate product durability, in biotechnology and pharmaceuticals , and in food research. The small benchtop, upright, and walk-in types of Temperature Humidity and CO₂ Test Chambers LIB can all be customized.

UL 1332
UL1332 UL2431 SO2 CO2 Gas Corrosion Durability Test Equipment

UL1332 UL2431 SO2 CO2 Gas Corrosion Durability Test Equipment

LIB industry UL1332 UL2431 SO₂ CO₂ gas corrosion durability test equipment accurately simulates corrosive industrial atmospheres to verify the long-term durability of coatings, metal substrates, and outdoor electrical enclosures under UL-specified conditions. The system operates in high-humidity (≈95% RH) and elevated temperature (~40 °C) environments while precisely introducing SO₂ and CO₂ , reproducing the wet gas corrosion mechanisms defined in UL1332 and UL50E. Extended exposure— hundreds to 1000 hours as required by UL2431—ensures stable, uniform conditions for reliable evaluation of coat

ISO 4892
UV Accelerated Weathering Tester

UV Accelerated Weathering Tester

Recreate Years of Outdoor Exposure in Just Weeks The UV accelerated weathering tester brings industry-proven performance to laboratories seeking faster, more reliable durability validation. By using precision-controlled UVA-340 or UVB-313 lamps , it replicates the most destructive portion of sunlight responsible for material degradation. An advanced condensation cycle simulates real-world dew conditions—often more aggressive than rain—accelerating failure mechanisms such as cracking, fading, and loss of strength.

ASTM G154
UV Aging Test Chamber for Outdoor Plastics and Paints

UV Aging Test Chamber for Outdoor Plastics and Paints

Outdoor plastics, paints, and protective coatings are exposed to sunlight, moisture, and temperature changes, which can cause fading, cracking, and loss of mechanical strength. The UV Aging Test Chamber from LIB industry accelerates outdoor weathering by combining high-intensity UVA-340 or UVB-313 lamps, programmable temperatures from ambient to 90°C, and condensation cycles of 40–60°C . With 8 evenly distributed lamps, adjustable irradiance, and a touchscreen controller for customizable cycles , it ensures uniform exposure and precise simulation of years of sunlight in a short laboratory test

IEC 61215
UV Preconditioning Test Chamber for Solar Panels

UV Preconditioning Test Chamber for Solar Panels

The UV Preconditioning Test Chamber for Solar Panels is purpose-built to support ultraviolet exposure steps defined in IEC 61215 and IEC 61730 photovoltaic qualification workflows. The system delivers stable UVA-dominant radiation (320–400 nm) with controlled UVB contribution and UVC content, while maintaining stable chamber temperatures up to 90 °C and Black Panel Temperature (BPT) from 35 °C to 80 °C . UV stress is managed through a ccumulated radiant energy control (kWh/m²) , ensuring repeatable and standard-aligned preconditioning prior to damp heat, thermal cycling, and mechanical load te

ISO 6988
Walk In Mixed Noxious Gas Chamber

Walk In Mixed Noxious Gas Chamber

Engineered for Large-Scale Corrosion Reliability Testing The LIB industry Walk-In Mixed Gas Test Chamber is designed to reproduce highly corrosive industrial and atmospheric environments using controlled concentrations of sulfur dioxide (SO₂), hydrogen sulfide (H₂S), nitrogen dioxide (NO₂), chlorine (Cl₂), and other mixed gases. Unlike conventional small-volume gas corrosion chambers, this walk-in design allows full-scale testing of: EV battery systems, Automotive assemblies, Aerospace components, Communication cabinets, Power distribution equipment, PCB systems,Military electronics,Rail trans

ASTM B117
Walk-in Salt Spray Chamber

Walk-in Salt Spray Chamber

The walk-in salt spray chamber is a large-scale corrosion resistance testing equipment, specially designed for large-volume products or multiple samples to conduct salt spray corrosion tests simultaneously, allowing technicians to directly enter the test area for operation or observation. It simulates the Marine climate environment or coastal climate by atomizing a 5% NaCl solution (support AASS, CASS, etc.) and diffusing it in the test space, it simulates the Marine. The T&H are controllable,assessing the durability of materials, coatings, electronic components and etc.

Chamber Accessories & Consumables
Wet Bulb Gauze for Temperature Humidity Chambers

Wet Bulb Gauze for Temperature Humidity Chambers

Accurate Humidity Measurement Starts from the Right Material Wet bulb gauze is a critical component in temperature and humidity measurement systems , wrapping the wet bulb sensor to maintain stable water absorption and evaporation conditions. LIB industry wet bulb gauze is made from linen, ensuring instant moisture penetration without beading. Its strong capillary effect keeps the sensing element consistently wetted, while lint-free long fibers protect sensitive probes.

Chamber Accessories & Consumables
Wet Wick for Humidity Test Chamber

Wet Wick for Humidity Test Chamber

The wet wick for humidity test chamber plays a critical role in wet-bulb humidity measurement. As a direct interface between the humidity sensor and water source, the quality of the wet wick directly affects humidity accuracy, stability, and repeatability during long-term testing. LIB industry wet wick is specially designed for environmental test chambers, ensuring consistent water absorption, uniform evaporation, and reliable humidity control across the full test cycle.

IEC 60068-2-5
Xenon Arc Chamber

Xenon Arc Chamber

The LIB Xenon Arc Chamber harnesses high-intensity xenon arc lamps to reproduce the full spectrum of natural sunlight, including UV, visible, and infrared light . By precisely controlling temperature from ambient up to 100 °C , humidity from 50 % to 98 % RH , and adjustable water spray cycles , materials undergo accelerated environmental aging—achieving years of real-world exposure in a fraction of the time. This allows engineers and researchers to evaluate fading, cracking, powdering, or strength degradation quickly and reliably.

IEC 60068-2-14
Temperature and Humidity Test Chamber

Temperature and Humidity Test Chamber

Struggling with unstable 85°C/85%RH tests or long delivery times? LIB industry temperature and humidity test chambers deliver precise control, fast customization, and proven reliability for ESS, aging, and product validation. Temperature humidity climate chambers have 3 low-temperature options : -20 ℃, -40 ℃, -70 ℃ , and the maximum temperature reaches +150 ℃ .Humidity control covers a wide range from 20%RH to 98%RH , ensuring accurate simulation of real-world environmental conditions.

ASTM D4169-16
Temperature Chamber

Temperature Chamber

Designed for accelerated reliability testing in R&D and quality inspection and covering a wide range of test volumes and performance demands, the LIB industry temperature chamber precisely simulates extreme thermal environments to identify product risks before market launch. The temperature range covers –20 ℃, –40 ℃, or –70 ℃ up to +150 ℃ , with ±0.5 ℃ temperature fluctuation to ensure stable and repeatable performance. Standard heating and cooling rates reach 3–5 ℃/min , while customized ramp rates are available to meet special test profiles, rapid thermal cycling, or non-standard requirement

ASTM B117
Cyclic Corrosion Test Chamber

Cyclic Corrosion Test Chamber

LIB cyclic corrosion test chamber can perform the neutral salt spray, acid salt spray, prohesion and the alternating salt spray corrosion test. These CCT chambers can comply with accelerated corrosion test methods included ASTM B117, ASTM G85, ISO9227, IEC60068-2-52, ISO7253 and many others. NSS, AASS and CASS test can be carried out in the cyclic corrosion fog spray chamber.Cyclic corrosion fog spray chamber reproduces a more authentic salt spray environment with adjustable humidity.

ASTM B117
Salt Spray Chamber

Salt Spray Chamber

Simulate Marine Salt Fog & Accelerate Plating and Coating Durability Tests LIB industry salt spray chamber simulates the salt fog marine climate through 5% concentration salt solution, supporting both neutral salt spray (NSS) and acid salt spray ( AASS/CASS ) tests.The salt spray test chamber is used in the salt spray corrosion test for accelerated corrosion performance of plating and coating on metal surfaces. Temperature Range is Ambient ～ +60 ℃ ,and the humidity range is 95% ~ 98% RH . Customizable for different sample sizes and industrial standards, LIB salt spray chambers guarantee unifor

IEC 60068-2-42
Noxious Gas Test Chamber

Noxious Gas Test Chamber

Reliable Corrosive Gas Testing for IEC 60068-2-42 & IEC 60068-2-60 Compliance LIB industry noxious gas test chamber enables manufacturers to identify corrosion risks early by accurately simulating real-world exposure to temperature, humidity and trace corrosive gases . Low-level gases such as SO₂, H₂S and NO₂ can cause long-term damage to metals, coatings and electronic components, often leading to unexpected failures in service. By providing precise control of gas concentration, temperature and humidity , the system supports IEC 60068-2-42 and IEC 60068-2-60 compliant single and mixed gas tes

IEC 60216
Industrial Oven

Industrial Oven

Reliable High-Temperature Solutions for Industrial Thermal Processing LIB industry Industrial Ovens are engineered to deliver stable, uniform, and precise high-temperature performance for a wide range of industrial applications. With small, medium, and large chamber volumes and maximum temperatures up to +250°C, +500°C, +800°C, +1000°C, +1200 °C , these ovens support everything from routine drying to extreme heat treatment processes. Available in both standard and fully customized designs , LIB industry offers a complete portfolio including High-Temperature Ovens, Ventilated Ovens, Vacuum Oven

Walk-in & Drive-in Chambers
Walk-In Environmental Chamber

Walk-In Environmental Chamber

Custom Large-Scale Environmental Testing Solutions by LIB industry The LIB industry walk-in environmental chamber is a large-scale environmental test system designed for full-size products, assemblies, and batch testing . Compared with standard reach-in models, the walk-in design allows operators to enter the test area, making it especially suitable for oversized samples, heavy loads, and long-duration testing . LIB industry delivers complete walk-in environmental chamber solutions , covering engineering design, manufacturing, delivery, on-site installation, commissioning, and operator trainin

การป้องกันน้ำและฝุ่น และการจำลองสภาวะแวดล้อม

36 รายการ
IEC 60068
Altitude Chamber

Altitude Chamber

LIB altitude chamber can simulate the air pressure at an altitude below 40,000 meters, and is used for combined temperature altitude humidity testing. The altitude test chamber can carry out low-pressure tests independently, and can also carry out comprehensive tests high temperature, low temperature and humidity. The high altitude test chamber is used to test the stability of the products when it is subjected to altitude, temperature, humidity, and comprehensive effects in the air or at high altitudes.

IEC 62133
Battery Test Chamber

Battery Test Chamber

Battery Test Chamber for EV Battery Safety Testing | Explosion Proof Environmental Test Chamber Designed specifically for lithium-ion batteries, EV battery modules, battery packs, and energy storage systems, the LIB Battery Test Chamber provides a safe and controlled environment for battery performance, reliability, and abuse testing. With an ultra-wide temperature range from -70°C to +170°C, the chamber covers virtually all temperature conditions required by international battery testing standards. It supports a wide variety of tests such as thermal cycling, high and low temperature storage,

MIL-STD-810
Blowing Sand and Dust Test Chamber

Blowing Sand and Dust Test Chamber

Accelerated Sand and Dust Testing According to MIL-STD-810 LIB Industry Blowing Sand and Dust Test Chamber is engineered to simulate harsh desert, military, aerospace, automotive, and outdoor operating environments. The chamber performs both Procedure I – Blowing Dust and Procedure II – Blowing Sand in accordance with MIL-STD-810 standards. The system automatically controls air velocity, dust concentration, temperature, and test duration, enabling reliable evaluation of enclosure sealing performance, component durability, optical systems, filters, electronic equipment, and military hardware ex

UL 9540A
Explosion Proof Battery Thermal Runaway Chamber

Explosion Proof Battery Thermal Runaway Chamber

With Cooling Liquid Tank and Automatic Lift Basket The Explosion Proof Battery Thermal Runaway Chamber from LIB industry is an advanced, highly specialized environmental test system engineered specifically for the safety testing of next-generation lithium-ion battery cells, modules, and packs. Designed to meet the stringent demands of the electric vehicle (EV) and energy storage systems (ESS) industries, this chamber offers an unparalleled dual-environment testing framework, allowing engineers to transition seamlessly between standard air-based thermal abuse and advanced liquid immersion cooli

IEC 60529
IP66 Tightness Test Equipment

IP66 Tightness Test Equipment

LIB industry IP66 tightness test equipment provides complete protection assessment against IPX6 water and IP6X dust ingress. The system includes a IPX6 water jet chamber makes test pieces suitable for use in most dry environments that sprays high pressure water with a flow rate of 100 L/min for at least 3 minutes, ensuring products resist powerful water jets. The IP6X dust tightness chamber uses talcum powder under negative pressure to verify full dust protection,making test pieces suitable for use in most dry environments.

IEC 60529
IP68 Water Proof Testing unit

IP68 Water Proof Testing unit

The IP68 Testing Unit from LIB industry incorporates two independent testing solutions in one: IP6X Dustproof Testing Unit and IPX8 Waterproof Testing, enabling comprehensive evaluation of products’ ingress protection complying with IEC 60529. The P68 water proof testing unit supports configurable test parameters including immersion depth up to 3 meters(The standard model can simulate water depths up to 50 meters or deeper), duration up to 72 hours and water temperatures +10°C to +40°C, simulating continuous submersion. Programmable cycles, adjustable immersion speed, and automatic water intak

IEC 60529
IP6K9K Test Chamber

IP6K9K Test Chamber

The IP6K9K test chamber is a specialized testing device designed to evaluate the waterproof performance of products under high-pressure and high-temperature water spray conditions,ensuring your products can withstand the most demanding environments. IPX6K indicates resistance to powerful water jets with a flow rate of 100L/min, simulating harsh cleaning or rain scenarios. IPX9K represents an even more rigorous test, involving high-pressure, high-temperature water sprays.

IEC 60529
IP6K9K Test Machine

IP6K9K Test Machine

IP6K9K Test Chamber | IPX6K IPX9K High Pressure Water Spray Testing Machine The IP6K9K test chamber is a high-performance environmental testing system designed to evaluate the protection level of product housings under high-pressure, high-temperature water spray conditions . 6 indicates anti-strong water spraying, and K represents the higher water spraying intensity. 9K is mainly to simulate the protection test of high temperature 88℃ and high pressure water 8000-10000kpa.It combines IPX6K strong water jet testing and IPX9K high-pressure hot water testing , making it a critical solution for va

IEC 60529
IPX3/IPX4 Handheld Water Spray Nozzle

IPX3/IPX4 Handheld Water Spray Nozzle

IPX3 IPX4 Handheld Water Spray Nozzle, IEC 60529 Waterproof Ingress Protection Test Equipment with Movable Shield & Pressure Gauge The IPX3/IPX4 Handheld Water Spray Nozzle is designed for IEC 60529 waterproof testing requiring controlled spraying and splash simulation. It is widely used to evaluate water resistance of electronic products, automotive components, outdoor electrical equipment, household appliances, lighting products, and industrial enclosures. Its handheld design enables flexible operation for laboratory testing, R&D validation, prototype evaluation, and on-site inspections.

IEC 60529
IPX5 IPX6 and IPX9 Ratings Liquid Penetration Testing Equipment

IPX5 IPX6 and IPX9 Ratings Liquid Penetration Testing Equipment

One-Stop Liquid Ingress Testing Solution| Compliant with IEC 60529 & ISO 20653 This IPX5 IPX6 and IPX9 ratings liquid penetration testing equipment is specifically designed for high-end manufacturing industries, integrating IPX5 (water jet) , IPX6 (powerful water jet) , and IPX9K (high-pressure, high-temperature spray) testing into one complete system. It provides precise and repeatable waterproof performance validation for products exposed to complex and harsh environments within a single platform. Widely used in automotive, new energy, electronics, outdoor equipment, and aerospace industries

IEC 60529
IPX8 Test Equipment

IPX8 Test Equipment

IPX8 test equipment is used to check and confirm whether the product complies with the IEC 60529 IPX8 waterproof grade.The IPX8 rating means that the product can work at a certain depth of water for a long time without damage. The water pressure is adjusted from 1 meter depth to 50 meters depth test the water resistance of the product and observe whether the item under test has water seepage. Model: R78-600 Standard: GJB 150.8-86, ISO 20653, IEC 60529, UL 50E, UL 1598, UL 153, UL1573, UL 60950-1, IPX7, IPX8

JIS D0203
JIS D 0203 Rain Spray Chamber

JIS D 0203 Rain Spray Chamber

The JIS D 0203 Rain Spray Chamber is a specialized testing system designed to evaluate the water resistance of components in compliance with the JIS D 0203 standard . It is widely used for testing automotive parts, electronic devices, and outdoor lighting products under simulated rain conditions.Equipped with 40 spray nozzles and 2 rain nozzles , the system accurately reproduces multiple rainfall intensities, ensuring reliable and repeatable waterproof performance testing. The JIS D 0203 test ensures that components can withstand: Water ingress under different pressures Continuous exposure to

LV 124
LV124 K-12 Temperature Shock and Splash Water Test Equipment

LV124 K-12 Temperature Shock and Splash Water Test Equipment

The LV124 K-12 Temperature Shock and Splash Water Test Equipment simulates rapid temperature changes from ambient to +150°C , combined with controlled splash water exposure at 0–4°C , It simulates rapid temperature changes and splash water exposure , reproducing the extreme conditions components face in real vehicles. The equipment applies controlled bursts of cold water at regular intervals , simulating the rapid thermal shock and moisture conditions specified by LV124 K-12. This method ensures repeatable and precise stress conditions while maintaining the workroom at ambient or set temperatu

IEC 60068
Temperature Altitude Chamber

Temperature Altitude Chamber

LIB temperature altitude chamber can be used to simulate the environment of low pressure ranging from atmospheric pressure(101.kpa) to 0.5kPa at high altitude, mainly for testing the performance and reliability of equipment in these extreme conditions, so temperature altitude chamber is a kind of high altitude test chamber . In a low pressure environment, the atmospheric pressure is reduced because the air density is reduced. In turn, it affects the mechanical pressure, heat dissipation efficiency, electrical performance, sealing and so on.

UL 50E
UL 50E Shower

UL 50E Shower

The UL 50E Rain Shower is engineered and manufactured in strict accordance with the UL 50E standard, specifically designed to evaluate the ingress protection performance of electrical equipment enclosures. By reproducing controlled rainfall environments such as light rain, moderate rain, and heavy rain, the system ensures that electrical cabinets, control panels, and outdoor enclosures meet the required protection levels for UL and NEMA certification, including Type 3R and NEMA 4 performance requirements . Manufactured by LIB industry , the UL 50E shower system provides stable water pressure,

SAE J575
Vibration Chamber

Vibration Chamber

Temperature Humidity Vibration Test Chamber for Combined Environmental Testing LIB industry vibration chamber simulates the combined effects of temperature, humidity, and vibration in a single integrated system. Designed for automotive, aerospace, electronics, military, and battery reliability testing, the system supports: Temperature range from -50°C to +150°C Humidity control from 30% to 98% RH Vibration frequency from 2 Hz to 4000 Hz Vertical and horizontal vibration testing Compatibility with customer existing shaker systems Compliant with IEC 68-2-1, IEC 68-2-2, IEC 68-2-3, SAE J575 and o

IEC 60529
Walk-In IPX1-IPX9K Rain Test Chamber

Walk-In IPX1-IPX9K Rain Test Chamber

Integrated Waterproof Testing Solution for Large Products and Complete IPX Spray Protection Tests Large industrial products, assembled electrical systems, automotive components, EV battery packs, outdoor cabinets, and communication equipment often cannot fit into standard waterproof test systems. Traditional small chambers also make it difficult to complete multiple IP waterproof tests efficiently. The LIB industry Walk-In IPX1-IPX9K Rain Test Chamber is designed for large-scale waterproof testing applications.

IEC 60529
IPX5 X6 Water Spray Jetting Chamber

IPX5 X6 Water Spray Jetting Chamber

IPX5 IPX6 Water Jet Test Chamber | Water Spray Jetting Chamber – LIB industry The IPX5 IPX6 Water Spray Jetting Chamber evaluates the waterproof performance of electrical and electronic products exposed to powerful water jets.This system simulates IPX5 and IPX6 ingress protection tests according to IEC 60529 and ISO 20653 , ensuring products can withstand water jets from different directions at a distance of 2.5–3 meters without harmful ingress. Equipped with precision nozzles, an electromagnetic flowmeter, and a programmable control system , the equipment accurately controls the required wate

IEC 60529
Water Spray Test Chamber

Water Spray Test Chamber

IPX1–IPX4 Ingress Protection Testing | IEC 60529 Rain Test System LIB Industry Water Spray Test Chamber is specifically designed for ingress protection (IP) testing of EUT (Equipment Under Test) enclosures in full compliance with IEC 60529 standard. Its key advantage lies in exceptional testing flexibility and scalability. The system not only fully supports the standard IPX1, IPX2, IPX3, and IPX4 test procedures, but can also be optionally expanded with IPX5, IPX6 , and IPX9K test modules.

IEC 60529
Waterproof Test Machine

Waterproof Test Machine

Integrated IPX1–IPX6 Waterproof Testing Solution LIB waterproof test machine integrates IPX1, IPX2, IPX3, and IPX4 waterproof grades into one workroom, with optional configurations for IPX5 and IPX6 . The system is designed in accordance with IEC 60529 and related international standards , and is widely used for waterproof performance testing of automotive lamps, wiper systems, sealing strips, locomotive instruments, low-voltage electrical enclosures, and other electronic and electrical products. By accurately simulating dripping, spraying, and splashing conditions, the LIB waterproof test mac

IEC 60529
IP Dust Test Chamber

IP Dust Test Chamber

IP Dust Test Chamber | IEC 60529 IP5X IP6X Dust Chamber Manufacturer LIB Industry IP Dust Test Chamber simulates the dust environment in line with IEC 60529 IP5X (to prevent harmful dust accumulation) and IP6X (to completely prevent dust intrusion) standards, to provide a basis for product design, production process improvement and quality control, to ensure that the product can resist dust intrusion in actual use, normal operation. ✔ Temperature range: room temperature ~ +50℃ ✔ Built-in vacuum system for IP6X testing ✔ Stable dust concentration (2–4 kg/m³) ✔ Uniform dust circulation system Fr

IEC 60529
Walk-in Dust Test Chamber

Walk-in Dust Test Chamber

The walk-in dust test chamber is designed for large products or batch samples’ IP5X, IP6X verification in industries such as automobiles, electrical and electronic engineering, and defence. The walk-in dust test chamber integrates multiple dust conveying and circulation devices to achieve high-consistency dust environment(2kg/m³-4kg/m³),maintaining a stable dust particle concentration and air flow distribution in a large workroom. Meanwhile, its structure facilitates the direct entry of the entire vehicle or large samples.

IEC 60529
Ingress Protection Test Equipment

Ingress Protection Test Equipment

Ingress protection test equipment is a professional equipment used to evaluate the protection level of the product housing (IP level according to IEC60529). The main test product for liquid water (such as rain, splashing, etc.) protection ability, a LIB ingress protection test equipment can complete IPX1-IPX6 waterproof test. LIB also offers water test equipment with other water resistance levels， IPX1 IPX2 water drip test apparatus , IP56 waterproof chamber ， IPX3 X4 test chamber , IPX8 test equipment ， IPX9K test equipment .

ISO 20653
IPX3 X4 Test Chamber

IPX3 X4 Test Chamber

LIB IPX3 X4 Test Chamber can simulate environments of water and spray tests that electronic products and their components may be subjected to during transportation and use, so as to test the waterproof performance of the DUT. It is suitable for the protection test and detection of external lighting, signal devices and automobile lamp shells of scientific research units such as electronics, aerospace, and military industry. Model: R-800C, R-1200C Standard: ISO 20653, IEC 60529, UL 50E, UL 1598, UL 153, UL1573, UL 60950-1, IPX3, IPX4

IEC 60529
IPX5 IPX6 Water Test Chamber

IPX5 IPX6 Water Test Chamber

The LIB industry IPX5 IPX6 water test chamber is engineered to verify a product’s waterproof rating and resistance to powerful water jets under IEC 60529 . Using a controlled spray distance of 2.5 m to 3 m , the system reproduces realistic outdoor rain and jet-stream exposure conditions for accurate IPX5 and IPX6 performance evaluation. The entire interior—including the test workroom, water circuits, and nozzles—is constructed from SUS304 stainless steel , ensuring long-term durability, corrosion resistance, and clean water flow.

ISO 20653
IPX9K Test Equipment

IPX9K Test Equipment

Compared with conventional waterproof test equipment, IPX9K testing focuses on real-world water shock resistance , LIB industry IPX9K Test Equipment is a environmental test chamber that simulates high temperature and high pressure spraying to test the waterproofness of DUT. IPX9K is the highest rating currently available for water ingress protection. There are a variety of models and sizes to choose, and can also be customized according to the special needs of customers.