Plastimeter H-01
เครื่องวัดความหนืดยางดิบแบบ Rapid Plastimeter ผลิตโดย CGM Technologies สำหรับค่า P0 และดัชนี PRI
เครื่องทดสอบ
INSTRUMENTS · 295 รายการ
76 เครื่องMonTech
สำหรับห้องแล็บยางคอมพาวด์ ต่อจากยางดิบที่ CGM ดูแล MonTech รับช่วงยางผสม — ทดสอบไดนามิก RPA และ MDR การกระจายตัวของสารตัวเติม และการเตรียมชิ้นงาน ระดับ R&D จากเยอรมนี
ดูสินค้าทั้งหมด →
122 เครื่องToyo Seiki
ครอบคลุมวัสดุนอกเหนือจากยาง พลาสติก ฟิล์ม กระดาษ และบรรจุภัณฑ์ — เมลต์โฟลว์ แรงกระแทก การเสียรูปด้วยความร้อน การซึมผ่าน และการสึกหรอ จากญี่ปุ่น ตั้งแต่ปี 2540
ดูสินค้าทั้งหมด →
9 เครื่องHITEC
ตรวจสารตัวเติมก่อนเข้าเครื่องผสม ทดสอบคาร์บอนแบล็ก — การดูดซับน้ำมัน ความแข็งและความแข็งแรงของเม็ด กากตะแกรง และปริมาตรอัด
ดูสินค้าทั้งหมด →
86 เครื่องLIB
ไม่ได้ทดสอบตัววัสดุ แต่ทดสอบสภาวะที่ชิ้นงานต้องทน — อุณหภูมิและความชื้น ช็อกความร้อน โอโซน ละอองเกลือ UV และการกันน้ำกันฝุ่น
ดูสินค้าทั้งหมด →
CGM Technologies
ผลิตในไทยเพื่ออุตสาหกรรมยางธรรมชาติ เครื่อง Plastimeter วัดค่า P0 และ PRI เครื่อง Mooney และ Rheometer ทดสอบการคงรูป — การทดสอบยางดิบที่โรงงานไทยใช้ทุกวัน
ไปที่ cgm-technologies.com
MDR 3000 Basic Moving Die Rheometer
Compact, entry model instrument for repetitive quality control testing as well as simple R&D applications.
Measuring Single-screw Extruders for Labo Plastomill | 655
In small size extruder test of Labo Plastomill, in addition to detecting torque, the pressure and temperature (maximum 4 points each) are also continuously detected during molding by installing resin temperature sensor and resin pressure sensor in the cylinder or die and the values are displayed on the monitor. Various kinds of molding dies and take-off devices are also available, allowing you to determine molding conditions by simulating and obtain various information such as pressure, temperature, torque, specific energy (MJ/m3) and extrusion amount at each rpm (each shear rate) in addition to detecting mold status such as extrusion mold product’s fish eye, dispersion, transparency and gloss by using a small quantity of sample.
Mooney Viscometer MV-01
เครื่องวัดความหนืดมูนี่ ผลิตโดย CGM Technologies วัดค่าความหนืดและเวลาสกอร์ชของยางคอมพาวด์
D-RPA 3000 Moving Die Rheometer
High-end instrument for demanding static and dynamic testing in QC and R&D with a huge set of customizing options. This enables testing capabilities that have not been possible to measure in a Rheometer before, such as die gap regulation, High-speed data acquisition (FT-Rheology), low-temperature cooling, …
Automated Melt Flow Index Tester / Semi Auto Melt Indexer | 521-4A
The Semi Auto Melt Flow Indexer is designed for measuring of the MFR (melt mass-flow rate) and MVR (melt volume-flow rate) according to ISO 1133 and ASTM D1238 with semi-automated functions such as loading test weight, residue purging and assisted cylinder cleaning to reduce the burden during operation, ensure operation safety and shortening work time.
MonKinetics / MonLAOS / MonScan / MonLink / MonNotify
MonKinetics The MonTech Kinetics software package allows the calculation of important material data which is required for process modelling and simulation. This includes activation energy, incubation time, ... on isothermal and non-isothermal cure processes. Based on acquired temperature profiles a accurate cure and conversion rate simulation can be performed. The additional “Online cure simulatio
D-MDR 3000 Moving Die Rheometer
Top model for advanced dynamic testing of all kinds of rubber, rubber-like, curing or crosslinking materials. This includes TPE, TPV, LSR, Composite materials, Polyolefins, ...
DisperCool 3000 Dispersion
The DisperCool 3000 is used for deep-freezing test samples to about glass-transition temperature prior to sample cutting. This patented system is specifically designed for Dispersion Testing to ensure a perfect test sample preparation and highest quality of the samples surface area.
DisperCut 3000 Dispersion
The DisperCut 3000 is the most accurate and effective way for preparing fine cut samples of cured and uncured rubber for dispersion testing applications. The sample is stretched while cutting to avoid any smearing or contamination of the cut surface. Precise sample cuts can be prepared in less then a second. For highest operator safety, the unit is fitted with two hand safety operation with anti-tiedown as well as automatic knife cover.
DisperTester 3000 Plus Dispersion
The MonTech DisperTester 3000 Plus is the newest model of carbon black dispersion tester - computer aided, advanced digital reflected light microscopy brought to the next level. The DisperTester 3000 Plus is the most advanced instrument for reliable filler dispersion analysis based on the superior compliance, reproducibility and repeatability well known from the DisperTester 3000 series.
MCool-40 / MCool-10 low-temperature cooling system
From viscous to elastic, from latex to composites, the MonTech Rubber Process Analyzer D-RPA 3000 can analyze the dynamic mechanical properties for a wide Phase Shift TanDelta range of rubber, elastomers and other viscoelastic materials. The sample is compressed in a closed die cavity between two biconical heated dies - a high-force direct drive torque motor mounted to the lower die generates a dy
FT 3000 C-H Fatigue Tester
The instrument is designed for continuous operation in applications such compound and material development as wellas in-process quality control in rubber plants and other areas requiring dynamic testing of rubber samples.
Box Compression Tester | 107
The (Box) Compression Tester evaluates the compression strength of packing boxes etc. Specifications Options
Fully-Automated Rubber Tensile Testing Machine / Strograph™ AR-T | 119
The Strograph AR-T is a testing machine for fully automatic tensile testing of rubber specimens under temperatures ranging from -40°C to 150°C. It consists of a specimen magazine (ISO 37 Dumb-bell test piece Type 1A), specimen dimension measuring unit, specimen feeding mechanism, pneumatic grips, measuring unit, extensometer, broken specimen removal unit, constant temperature chamber, refrigerator, and PC.
Universal / Tensile Materials Testing Machine with Environmental Chamber / Strograph™-T | 120-TF-50F
The Strograph-T line is a universal Testing Machine ( UTM/Tensile Tester ) designed exclusively for environmental testing (-50 to +200°C) , capacity up to 10kN. This UTM is suitable for tensile, compression and flexural testing of plastics, rubber materials etc under high and low temperature circumstances. Specially designed test frame with environmental chamber provides large vertical test space.
Film Impact Tester | 195/196
The Film Impact Tester measures puncture impact strength of thin materials such as films and wrapping papers by puncturing of a hemispherical hammer.
Ring Crush Test (RCT) | Strograph™ E with RCT Jig | 210
Strograph™ E line is a most cost effective single column tabletop universal testing machine (UTM) with a maximum force capacity of 1kN which is suitable for testing tensile, compression, bending, peeling, friction etc. of various kinds of materials such as plastic film, elastomer, textile, paper etc. Ring Crush Test (RCT) can be performed by replacing the jig.
Universal/Tensile Testing Machine | Strograph™-E (1kN) | 210-E3
Strograph E-line is a most cost effective single column bench-top universal testing machine (UTM) with a maximum force capacity of 1kN which is suitable for testing tensile, compression, bending, peeling, friction etc. of various kinds of materials such as plastic film, elastomer, textile, paper etc. A wide range of options such as specimen grips, extensometers etc.
Fully-Automated Plastic Film Tensile Testing Machine / Strograph™ AE Film | 211
Strograph AE Film is a fully automated tensile testing machine which is designed exclusively for plastic films.
Fully-Automated Plastic Tensile Testing Machine / Strograph™-AP | 218-AP4
The Strograph AP is designed exclusively for the fully-automated tensile testing of plastics according to ISO 527-2 and ASTM D638. Once specimens are loaded into specimen magazine, this advanced system conducts continuous tensile testing of 200 specimens without human intervention. The sequence from specimen dimensional measurement, specimen mounting on grips, tensile testing, specimen disposal and data collection is performed in fully automatic mode.
Fully-Automated Rubber Tensile Testing Machine / Strograph™ HT | 219
The Strograph HT is the fully automated tensile testing machine for rubber with the thermostatic chamber.
De Mattia Flex-Cracking Tester | 255/263
The De Mattia Flex-Cracking Tester measures endurance of rubber specimens with regard to repeated bending and length of crack generated due to repeated bending.
Creep Testing Machine 【Creep Tester】 | 259
The Creep Tester performs tensile creep test by applying a constant tensile load to the specimens in a controlled temperature chamber, subjecting the materials to a high level of stress under load and temperature over time. With high precision sensors to continuously monitor the materials, it is able to measure minute elongation for calculation of strain in the materials.
DM 3000 Density
Densimeter for testing of individual samples with automated test sequence and internal self-calibration
HT 3000 Auto Rotation Five Hardness
Automatic test stand with motorized hardness head movement and continuous multi sample automation by integrated rotary tray. Multiple readings per sample with average or median calculation. Simplified single button operation, different centering masks for various sample and product shapes are optionally available.
HT 3000 Auto Rotation Single Hardness
Automatic test stand with motorized hardness head movement and single sample automation by rotating sample platform. Multiple readings per sample with average or median calculation. Simplified single button operation and optional centering masks.
HT 3000 Auto Hardness
Automatic test stand with motorized hardness head movement Single button operation and integrated power supply, controlled indentation speed acc. standards Optional: variable indentation speed, Pass/Fail indicator light
HT 3000 Chamber Hardness
The HT 3000 Chamber consists of an all-stainless 240 Liter measuring chamber available
HT 3000 Manual Hardness
Manual test stand with simplified lever operation Integrated height adjustment and adjustable test surface
HT 3000 Modular Tack & Force testing system
The revolutionary HT 3000 Modular Tack testing system is a new, highly efficient and reliable procedure for the determination of the tackiness of rubber materials. Designed for a variety of applications – not only for the tire industry – the system is capable of determining the tackiness / autohesion (static friction force) rubber and polymer materials. Tack testing allows to precisely distinguish
HT 3000 Modular Hardness
HT 3000 Modular Flexible and adaptable Hardness testing Modular
HT 3000 Hardness
Hardness (resistance to indentation) is one of the most important properties of rubber products and parts. MonTech therefore offers a full range of handheld and benchtop precision hardness testers according to various scales and standards.
Physical testing automation solutions
Can keep up with testing? Samples everywhere? We’ve got you covered with our intelligent solutions! Besides a complete range of standalone or production integrated automation solution MonTech can tailor automated testing for your parts and laboratory space. Utilizing latest industrial automation technology our system provide a solid testing platform generating reliable results with a short return
RB 3000 Rebound Resilience
The RB 3000 automatic Rebound Resilience tester allows the determination of the resilience properties of rubber and elastomeric materials according to DIN 53512, ISO 4662, ASTM D 1054 and ASTM D 7121. Rebound resilience is defined as the relation between the returned and the impact energy between the hammer with its fin, the specimen and the instrument. The samples used for testing are typically rubber and elastomeric materials as buttons or strips in a hardness range of 30 to 85 Shore A / IRHD N.
RD 3000 Density
The RD 3000 compression density tester provides a simple and convenient way to determine the density of raw polymers, masterbatches and uncured rubber compound specimens of any shape or geometry. The instrument features an integrated precision scale for accurately measuring the weight of the specimen. In a second step, all air trapped in the sample is removed by compressing the material in a massive barrel - once stabilized - allows the volume to be determined. Once the test sequence is finished the density is automatically calculated and displayed on the integrated touchscreen. Optionally the instrument can be controlled and test results can be remotely acquired by the MonDevice software system.
85°C 85%RH Constant Climate Chamber
Reliability Testing for PV Modules | Compliant with IEC 61215 & IEC 61730 | Damp Heat Test In the solar industry, long-term durability is non-negotiable. The 85°C 85%RH constant climate chamber is engineered specifically for the Damp Heat (DH) Test(high-temperature and high-humidity environment) , simulating extreme tropical environments to evaluate a PV module's resistance to delamination, moisture ingress, thermal stress and material aging during long-term use. Designed for continuous operation of 1000 to 2000 hours , our chambers provide the rock-solid stability required by global certifica
ASTM G151 G155 Xenon Light Radiation Exposure Test Machine
The ASTM G151 G155 Xenon Light Radiation Exposure Test Machine is a full-spectrum solar aging simulator engineered to reproduce long-term outdoor environmental stress within a controlled laboratory cycle. Using a 4500W water-cooled xenon arc lamp, programmable irradiance from 35–150 W/m² , black panel temperature 35–85℃ , and moisture control from 50%–98% RH , it replicates the combined impacts of UV photolysis, infrared thermal expansion, condensation, hydrolysis, and temperature fatigue. Unlike color-focused fading chambers, this machine emphasizes material stability, structural displacement
CO₂ Carbonation Curing Chamber Automation Kit
Intelligent Environmental Control for Concrete Carbonation Research The CO₂ Carbonation Curing Chamber Automation Kit form LIB industry is designed to open a greener future for concrete research. It is specifically developed for CCUS (Carbon Capture, Utilization and Storage) studies, low-carbon concrete development, and carbonation depth testing. With this kit, a standard temperature and humidity curing chamber can be easily upgraded into a high-precision CO₂ carbonation curing system.
Combined Salt Spray and Climate Test Chamber
High-Performance Combined Salt Spray and Climate Test Chamber with Explosion-Proof System The Combined Salt Spray and Climate Test Chamber is an all-in-one environmental simulation system engineered for demanding automotive, electronics, and aerospace testing. By integrating a full-capability salt spray system into a standard vertical climatic chamber footprint, this advanced unit allows you to conduct complex cyclic corrosion tests (Salt Spray, Drying, Humidity, and Condensation) in a single continuous program without moving the specimens. Equipped with an industrial-grade Explosion-proof Win
Cryogenic Chamber
LIB industry Cryogenic Chamber adopts a high-performance mechanical refrigeration system and delivers stable deep cryogenic testing down to -120°C . The system is engineered for continuous, repeatable operation at ultra-low temperatures, ensuring reliable performance and energy-efficient operation under demanding test conditions. Throughout extended low-temperature holding and temperature recovery processes, the chamber maintains excellent temperature stability and control accuracy .
Damp Heating Chamber for PV Modules
Damp heating chamber for pv modules is used to test the long-term weather resistance of photovoltaic modules, simulate high temperature and high humidity environment (wet heat 85℃/85%RH) to accelerate the aging process, complies with IEC 61215 / IEC 61730 and other standards. Through the simulation of high temperature and high humidity environment, it is used to evaluate the reliability and durability of photovoltaic panels in harsh weather conditions such as tropical and humid. Model: DHPV-04,PV-04 Standard: ,IEC 62804,IEC 61215,IEC 61646,IEC 61730,UL 1703,JIS C-8990,C-8991,C-8917,C-8938
Double Door Custom Temperature Humidity Chamber
Flexible Structural Tailoring for Large-Scale and Complex Environmental Testing Are you struggling with oversized specimens that won’t fit through standard doors? Or do you need a chamber that integrates seamlessly with your specific lab cabling and external sensors? LIB Industry’s Double Door Custom Temperature Humidity Chamber is more than just a large-capacity temp and humidity chamber.
Drive-In Environmental Chamber
LIB drive-In environmental chambers are available in many sizes and configurations. Drive In chambers is designed for testing of any type vehicle such as automobiles with the capability to simulate weather environments from extreme heat and humidity to cold temperatures.
H2S Corrosion Chamber
H2S corrosion chamber creates a single H2S gas 10 ~ 100ppb ± 20ppb(adjustable) space.The change of temperature and humidity has a great influence on the corrosion of H2S and the wide range of temperature ranging from 15 ℃ to 100 ℃ and humidity ranging from 30% to 98% RH broadens the possibility of H2S material corrosion test. Diverse models including standard and custom H2S corrosion chamber are available.Shortened lead time and 3-year long full machine warranty, contact us for solutions and quotes. Model: GC-100, GC-225, GC-500, GC-800, GC-1000 Standard: ISO 6988, ISO 3231, DIN 50018, ASTM G8
High Low Temperature Test Chamber
The high low temperature test chamber is used to test the reliability of products in high and low temperatures.The parts and materials of related products are tested for cyclic changes of high temperature and low temperature (alternating). The rising and cooling rate of 5℃/min can meet the high and low temperature alternating environment required by the test piece.Temperature range: from -20℃, -40℃, -70℃ (3 low temperature types) to +150℃. Model: TR5-100, TR5-225, TR5-500, TR5-800, TR5-1000 Standard: AAMA501, ASTM D4169-16, IEC 61215, IEC 61646, IEC61108, IEC62688, MIL-STD-811D,SAE J575
Humidity Calibration Chamber
LIB Humidity Calibration Chamber provides a stable and uniform environment for calibrating temperature and humidity sensors, hygrometers, data loggers , and other measuring instruments.Available in 50L and 80L volumes, it provides a space-saving solution for laboratories and quality control departments with limited installation space. With temperature ranges down to -70°C and up to +150°C , and humidity control from 20%RH to 98%RH , the climate calibration chamber can generate stable environmental conditions for calibration across a wide range of operating points. Equipped with a high-accuracy
Hydrolysis Aging Test Stability Chamber
The Hydrolysis Aging Test Stability Chamber is an environmental simulation system engineered to reproduce moisture-driven material degradation mechanisms under tightly controlled temperature and humidity conditions. Rather than simple damp heat exposure, the system focuses on long-duration hydrolysis aging , where heat, water vapor, and time jointly accelerate polymer chain scission and physical property decay. Typical conditions such as 70 °C / 95% RH for 168 hours or longer are maintained with high stability to evaluate changes in tensile strength, elongation at break, tear resistance, surfa
Digital Clark Stiffness Tester | 108
The Digital Clark Stiffness Tester evaluates the stiffness of paper and woven cloth, etc. by simulating the state of folding by self-weight. Features & Benefits • Simply mount the test specimen and tap the start key to begin measurement.
Taber type Stiffness Tester | 155
The Taber type Stiffness Tester measures the stiffness of paperboard according to ISO 2493-2. Features & Benefits ● Simply attach the test specimen and press the start key to start measurement (automatic measurement mode). ● The left and right bending moments and their average values are displayed simultaneously (automatic measurement mode).
Gurley type Densometer | 158
The Gurley type Densometer measures the air permeability of paper and other materials. Transmit time (air permeability resistance) of 100cc and ISO air permeability can be displayed by automatically detecting falling rate of pressure cylinder. Features & Benefits ● Automatic calculation enabled by high-precision detection with the optical fiber sensors This tester correctly detects and counts the scale of air permeability amount with the optical fiber sensors.
Elmendorf Tearing Tester | 163/164
The Elmendorf Tear Tester evaluates the tear resistance of paper, textile, plastic film etc. Digital Elmendorf Tearing Tester | 164 Tearing resistance is determined from the loss of potential energy of a fan shaped pendulum and the results are automatically calculated displayed on the touch screen. Ordering Information Elmendorf Tearing Tester | 163 The simple analog scale model is an economical alternative to the digital model.
Digi-Bekk Smoothness Tester | 168
The Digi-Bekk Smoothness Tester evaluates smoothness of paper specimen from the rate at which air leaks out from the space in between the surface of samples (put in contact with a smooth glass surface) and the smooth glass surface.
Water Vapor Permeability Cup【Moisture Pervious Cups】 | 188
The Moisture Pervious Cups are used to evaluate water vapor permeability. Evaluation is made by weighing the amount of water vapors pass through a specific area of membranous sample in 24 hours.
Light-load Tearing Tester | 193
The Light-load Tearing Tester measures the tear strength of a “single” specimen of a material with low tear strength, such as plastic film. Suitable for materials with low tearing strength that cannot be handled by the Elmendorf type tearing tester.
Paper/Film Thickness Tester 【Digi-Thickness Tester】| 201
The Digi-Thickness Tester measures the thickness of plastic film, paper, rubber, textile according to JIS Z 1702, P 8118 etc. Features & Benefits ● Resolution 0.001mm, digital display. ● Automatic elevation anvil allowing continuous measurement by simply moving the specimen.
Tape Press Roll | 278
In testing tracking force of adhesive tape correctly, it is necessary to adhere and make samples under onstant conditions.
Water Proofing Tester | 350
The Water Proofing Tester can be used for measuring waterproofing by JIS K 6404-7 method B, by applying water pressure to one side of specimen and measuring the pressure of water that leaks out from the opposite side.
Pencil Scratch Hardness Tester | 431
The Pencil Scratch Hardness Tester evaluates hardness of paint films from scratching by a pencil lead having a specific hardness kept at 45° under constant load and moving specimen table, and the scratch so generated is measured.
Zahn Viscosity Cups | 435
The Zahn Viscsity Cups capable of measuring viscosity on the spot when it is required to control viscosity of ink or paints at job site. Viscosity can be determined from the time required for the specimen filled in the cup to flow out through.
Random Access Sample Buffer (RASB) for IPHT
Motorised 14-position sample carousel option for the IPHT. It gives random access to any sample position under control of the IPHT software and pneumatically cleans the sample container between tests; it can be removed at any time to use the IPHT as a simple tester.
CVST Compressed Volume Structure Tester
Void-volume tester for carbon black, derived from ASTM D6086 and compliant with ASTM D7854. Two force sensors measure applied and transmitted pressure through controlled compression and decompression, and the software also derives residual void volume, material friction and electrical conductivity.
DABS Oil Absorption Basic System
Oil absorption system that characterises the structure of carbon black and silica to ASTM D2414 (OAN), ASTM D3493 (COAN), ASTM D6854, ISO 4656 and ISO 19246. It records mixing torque against oil volume, applies normalisation against reference materials, and is operated from a panel-mounted 7" screen or a connected PC.
IPHT Individual Pellet Hardness Tester
Automated tester for the individual crush strength of carbon black pellets, compliant with ASTM D5230 and ISO 8942. It measures force up to 250 cN and pellet size from 0.8 to 3.5 mm, with an integrated random access sample buffer and damping table, controlled from a Windows PC.
PMST Pelletized Powder Mass Strength Tester
Test equipment that determines the mass strength of pelletized carbon black to ASTM D1937 by measuring the force needed to pack a cylindrical column of pellets. It is a standalone table model with a programmable controller, a 500 N load cell and a stepper-driven plunger with position feedback.
HCBP Carbon Black Press
Hydraulic press for preparing compressed carbon black samples to ASTM D3493 and ISO 4656 ahead of a COAN determination. It applies a fixed 165 MPa to the sample inside an enclosed chamber with a transparent door and a rear connection for the laboratory exhaust system.
NDA VACU Non-Dispersible Matter (NDM) Test Set
Floor-standing test set that determines non-dispersible matter in carbon black and other powders by mechanical water flushing, following the functional principle of ASTM D7724. It runs a fully automatic program with a 50 litre collecting tank, an integrated water pump and 105 mm sieves.
A 2000 Sieve Residue Testing Device
Bench-top sieve residue tester for carbon black and other powders, working by mechanical water flushing to ASTM D1514, ISO 1437 and JIS K 6218-3. Measurement ranges run from 0.020 mm to 0.8 mm using 50 mm sieves in a sealed, dust-free stainless steel vessel.
MT 1 Sieve Residue Testing Device
Sieve residue testing device (Mocker apparatus) for pigments, extenders and other powders, designed to DIN EN ISO 787-18. A water jet rotor circulates the sample inside a glass vessel and flushes fines through the sieve, leaving the residue for gravimetric analysis.
CP 3000 Auto Bale Cutters
The CP 3000 Auto is the most efficient way to get your sample preparation and cutting done! Whether for synthetic or natural rubber bales this cutting system is the most efficient solution for sample feeding and preparation.
CP 3000 Compact Bale Cutters
The laboratory bale cutter CP 3000 provides the most convenient solution to cut and slice polymers bales, blocks and rubber sheets. Fitted with a two-hand safety operation system, optional automatic knife cover and feeding tunnel the unit provides utmost operator convenience meeting highest safety standards.
Universal sample Cutting knives and Dies
All cutting dies are available as single, double, triple or multi dies. - Example configuration
Laboratory curing moulds
MonTech Precision Curing moulds - General Overview and Introduction In our inhouse mould-making shop MonTech manufactures a comprehensive range of precise and durable sample curing moulds according to ISO, DIN, ASTM and GB standards in various different versions. MonTech curing moulds guarantee easy handling and accurate moulding results. The molds are available with single or multiple cavities, h
LP 3000 – 1000kN L Laboratory press
The LP 3000 1000kN L is a high-capacity floor standing hydraulic laboratory press for high performance curing and preparation of rubber samples. Capable of producing up to 1000kN of compression force, this model is designed in accordance with ISO, ASTM, DIN, GB and other international standards for temperature uniformity, parallelism and safety.
LP 3000 – 1000kN Laboratory press
The LP 3000 1000kN is a high-capacity floor standing hydraulic laboratory press for high performance curing and preparation of rubber samples. Capable of producing up to 1000kN of compression force, this model is designed in accordance with ISO, ASTM, DIN, GB and other international standards for temperature uniformity, parallelism and safety. 196 x 196 mm to 596 x 596 mm and maximum press forces of 20 to 150 tons (200 to 1500kN) a matching system is available for almost any application and capacity requirement.
LP 3000 – 1500kN Laboratory press
The 1500 kN rubber laboratory press is designed to accommodate larger molds and lighter scale production. Featuring the best insulation, platen parallelism, heat stability and data collection software, the 1500kN press is compliant to the strictest laboratory press standards making it the top-tier press for R&D.
LP 3000 – 200kN Laboratory press
The LP 200kN press is a medium sized benchtop hydraulic laboratory press for high performance curing and preparation of rubber samples. Capable of producing up to 200kN of compression force, this model is designed in accordance with ISO, ASTM, DIN, GB and other international standards for temperature uniformity, parallelism and safety.
LP 3000 – 600kN Laboratory press
The LP 600kN is a high-capacity hydraulic laboratory press for high performance curing and preparation of rubber samples. Capable of producing up to 600kN of compression force, this model is designed in accordance with ISO, ASTM, DIN, GB and other international standards for temperature uniformity, parallelism and safety.
M-VS 3000 Specimen preparation
The M-VS 3000 Mooney volumetric sample cutter enables higher accuracy, repeatability and optimized testing results in Mooney Scorch and Viscosity testing by preparing test samples with a constant volume. The M-VS 3000 also features automatic cutting of a center hole for the rotor shaft along with a time delay for compressing.
NC 3000 Die and Sample cutting
The tabletop NC 3000 has specifically been designed for slitting samples for tear testing with a precision nick according to the requirements of ISO 34 die B, ISO 34 die C and ASTM D624 die B.
P-VS 3000 Compression former
ompression former / arallel cu er ech P- 3000 ompression former Mon ech P- 3000 Para pneumatic sample former for “press to shape” Universal pneumatic sample cutter with large working area and parallel guided crosshead P-VS 3000 Compression former has been specifically designed for pressing The P-VS 3000 Para has been designed for versatile applications to prepare forming of specimens from e.g. pel
Gehman Stiffness Tester | 223
The Gehman Stiffness Tester evaluates the torsional stiffness of rubber at low temperature according to ISO 1432. The testing operation is automatic and specimens are twisted by means of torsion wires having nominal torsional constants at programmed test temperature. The angle of twist produced at this time is detected and is sent to the PC.
Low Temperature Retraction Tester | 226
The Low Temperature Retraction Tester evaluates the temperature at which a specimen reaches a certain specified contraction ratio while the temmperature of the specimen, which has been stretched to a certain level and frozen at a low temperature, is raised at a certain constant rate. The TR test is mainly used to determine the elastic recovery characteristics at a low temperature of the materials of which sealing performance is required, such as rubber seal components, hose etc.
MVSS Flammability Tester | 501
Safety standards with regards to flammability of interior materials of automobiles are prescribed. The MVSS Flammability Tester is used to test flammability of such materials.
Brittleness Temperature Tester (Brittle Point Temperature Tester) | 525
The Brittleness Temperature Tester evaluates specimens immersed in liquid at low temperature. Impact is applied by hammer at constant speed and evaluation is made from generation of cracks. Specimen Clamps OPTIONS
High Temperature HDT/Vicat Tester | 532
High temperature HDT Tester is designed for HDT and Vicat testing at temperatures exceeding 300°C. Temperature distribution is dramatically improved by controlling the placement of test specimens and the air flow in the chamber.
Triple Parallel Plate Plastometer | 534
The Triple Parallel Plate Plastometer is used for conducting heat deformation test of electric wires, etc.
Candle type Flammability Tester | 606 (Model AC3)
The Candle Type Flammability Tester evaluates the flammability of polymeric materials such as rubber, plastic, and fiber using the oxygen index method. The test method evaluates the relative flammability of materials by measuring the limiting oxygen concentration (oxygen index) at which a test specimen can barely continue to burn like a candle flame in a slowly rising mixture of oxygen and nitrogen gas.
Cone Calorimeter | 607
The Cone Calorimeter measures heat release rate, oxygen consumed, heat release, etc. which predict degree of fire hazard of materials.
Cable Flammability Tester | 632
The Cable Flammability Tester evaluates burning resilience of an electric cable. It conforms to UL 1581.
Thermal Conductivity Tester | 669
The Thermal Conductivity Tester measures thermal conduvtivity of plastic materials during the transition from melted state to solid state. The tester is also capable of measuring the conductivity during the change of state from solid state to melted state.
Metal Bath | 774
The metal bath used for fogging test, etc. *Testing tubes are not provided.
HDT & Vicat Testing Machine / HDT Tester | 533
The HDT/Vicat Tester uses a 2 steps split loading system to ensure simultaneous application of the load on the specimens, applying a consistent fixed stress to the specimens. Using their patented design of the stirring and circular flow, Toyoseiki HDT Tester is able to ensure the temperature uniformity of the oil bath. Equipped with high precision LVDT, and Pt100 temperature sensors at each station, Toyoseiki’s HDT Tester is able to provide consistent, stable results when measuring the temperature as the limiting distortion is reached.
Altitude Chamber
LIB altitude chamber can simulate the air pressure at an altitude below 40,000 meters, and is used for combined temperature altitude humidity testing. The altitude test chamber can carry out low-pressure tests independently, and can also carry out comprehensive tests high temperature, low temperature and humidity. The high altitude test chamber is used to test the stability of the products when it is subjected to altitude, temperature, humidity, and comprehensive effects in the air or at high altitudes.
Battery Test Chamber
Battery Test Chamber for EV Battery Safety Testing | Explosion Proof Environmental Test Chamber Designed specifically for lithium-ion batteries, EV battery modules, battery packs, and energy storage systems, the LIB Battery Test Chamber provides a safe and controlled environment for battery performance, reliability, and abuse testing. With an ultra-wide temperature range from -70°C to +170°C, the chamber covers virtually all temperature conditions required by international battery testing standards. It supports a wide variety of tests such as thermal cycling, high and low temperature storage,
Blowing Dust Test Chamber
As a leader in environmental simulation chamber, LIB Industry blowing dust test chamber complies with MIL STD 810 standard. The MIL STD 810H standard is designed to ensure the reliable operation of military equipment in a variety of harsh sand and dust environments. The blowing dust test chamber blows the dust into the workroom to form a dust environment with high wind speeds 1.5-8.9m/s and 18.0-29.0m/s respectively for dust and sand.
Blowing Sand and Dust Test Chamber
Accelerated Sand and Dust Testing According to MIL-STD-810 LIB Industry Blowing Sand and Dust Test Chamber is engineered to simulate harsh desert, military, aerospace, automotive, and outdoor operating environments. The chamber performs both Procedure I – Blowing Dust and Procedure II – Blowing Sand in accordance with MIL-STD-810 standards. The system automatically controls air velocity, dust concentration, temperature, and test duration, enabling reliable evaluation of enclosure sealing performance, component durability, optical systems, filters, electronic equipment, and military hardware ex
Drive-In IP5X IP6X Dust Test Chamber
Ground-Level Access | Heavy-Duty Design for IP5X / IP6X Large Equipment Reliability Testing Are you struggling with steep, hazardous ramps when loading heavy automotive components? Or facing tight laboratory ceiling constraints that make standard large-scale walk-in chambers impossible to install? LIB industry Pit-Mounted Drive-In Dust Test Chamber solves both challenges simultaneously.
Explosion Proof Battery Thermal Runaway Chamber
With Cooling Liquid Tank and Automatic Lift Basket The Explosion Proof Battery Thermal Runaway Chamber from LIB industry is an advanced, highly specialized environmental test system engineered specifically for the safety testing of next-generation lithium-ion battery cells, modules, and packs. Designed to meet the stringent demands of the electric vehicle (EV) and energy storage systems (ESS) industries, this chamber offers an unparalleled dual-environment testing framework, allowing engineers to transition seamlessly between standard air-based thermal abuse and advanced liquid immersion cooli
GMW 16001 Water Spray Chamber
The GMW 16001 water spray chamber, also known as the GMW 16001 water leak test chamber, is used to simulate high-pressure water injection environments and is tested according to the GMW 16001 standard to test equipment with firmware seal problems. Low pressure spray, water immersion and high pressure spray tests are available. Model: R-300 Standard: GMW 16001
IP56 Waterproof Chamber
IP56 waterproof chamber meets the IPX5 and IPX6 waterproof grades in IEC60529 standard, "5" means that the water flow from the nozzle should spray the product shell from any angle, 6: prevents strong water. IP56 waterproof chamber is designed to test IPX5, IPX6 water jet protection level test. Model: R56-800 Standard: IEC 60529, IPX5, IPX6, ISO20653, IEC 60068-2-68, IEC 60598, MIL-STD-810G, GJB 150.8-86, ISO 20653, UL 50E, UL 1598, UL 153, UL1573, UL 60950-1
IP65 Tester
IP65 Tester detects whether the product protection level meets IP65 standards. The "6" of IP (Ingress Protection) 65 indicates that the dust level is very high, and dust can hardly enter the device. 5 indicates protective water spraying, which does not cause harmful effects on the device from any angle.
IP66 Tightness Test Equipment
LIB industry IP66 tightness test equipment provides complete protection assessment against IPX6 water and IP6X dust ingress. The system includes a IPX6 water jet chamber makes test pieces suitable for use in most dry environments that sprays high pressure water with a flow rate of 100 L/min for at least 3 minutes, ensuring products resist powerful water jets. The IP6X dust tightness chamber uses talcum powder under negative pressure to verify full dust protection,making test pieces suitable for use in most dry environments.
IP68 Water Proof Testing unit
The IP68 Testing Unit from LIB industry incorporates two independent testing solutions in one: IP6X Dustproof Testing Unit and IPX8 Waterproof Testing, enabling comprehensive evaluation of products’ ingress protection complying with IEC 60529. The P68 water proof testing unit supports configurable test parameters including immersion depth up to 3 meters(The standard model can simulate water depths up to 50 meters or deeper), duration up to 72 hours and water temperatures +10°C to +40°C, simulating continuous submersion. Programmable cycles, adjustable immersion speed, and automatic water intak
IP6K9K Test Chamber
The IP6K9K test chamber is a specialized testing device designed to evaluate the waterproof performance of products under high-pressure and high-temperature water spray conditions,ensuring your products can withstand the most demanding environments. IPX6K indicates resistance to powerful water jets with a flow rate of 100L/min, simulating harsh cleaning or rain scenarios. IPX9K represents an even more rigorous test, involving high-pressure, high-temperature water sprays.