MDR 3000 Basic Moving Die Rheometer
Compact, entry model instrument for repetitive quality control testing as well as simple R&D applications.
MonTech
สำหรับห้องแล็บยางคอมพาวด์ ต่อจากยางดิบที่ CGM ดูแล MonTech รับช่วงยางผสม — ทดสอบไดนามิก RPA และ MDR การกระจายตัวของสารตัวเติม และการเตรียมชิ้นงาน ระดับ R&D จากเยอรมนี
- ISO 6502
- ASTM D5289
- DIN 53529
- ISO 13145
- ASTM D6204
- ASTM D6601
- ASTM D6048
- ASTM D7050
ประเทศเยอรมนี
จำนวนรุ่น76 เครื่อง
บริการสอบเทียบและซ่อมบำรุงโดย CG
รีโอโลยีและคอมพาวด์
28 รายการ
D-RPA 3000 Moving Die Rheometer
High-end instrument for demanding static and dynamic testing in QC and R&D with a huge set of customizing options. This enables testing capabilities that have not been possible to measure in a Rheometer before, such as die gap regulation, High-speed data acquisition (FT-Rheology), low-temperature cooling, …
MonKinetics / MonLAOS / MonScan / MonLink / MonNotify
MonKinetics The MonTech Kinetics software package allows the calculation of important material data which is required for process modelling and simulation. This includes activation energy, incubation time, ... on isothermal and non-isothermal cure processes. Based on acquired temperature profiles a accurate cure and conversion rate simulation can be performed. The additional “Online cure simulatio
D-MDR 3000 Moving Die Rheometer
Top model for advanced dynamic testing of all kinds of rubber, rubber-like, curing or crosslinking materials. This includes TPE, TPV, LSR, Composite materials, Polyolefins, ...
DisperCool 3000 Dispersion
The DisperCool 3000 is used for deep-freezing test samples to about glass-transition temperature prior to sample cutting. This patented system is specifically designed for Dispersion Testing to ensure a perfect test sample preparation and highest quality of the samples surface area.
DisperCut 3000 Dispersion
The DisperCut 3000 is the most accurate and effective way for preparing fine cut samples of cured and uncured rubber for dispersion testing applications. The sample is stretched while cutting to avoid any smearing or contamination of the cut surface. Precise sample cuts can be prepared in less then a second. For highest operator safety, the unit is fitted with two hand safety operation with anti-tiedown as well as automatic knife cover.
DisperTester 3000 Plus Dispersion
The MonTech DisperTester 3000 Plus is the newest model of carbon black dispersion tester - computer aided, advanced digital reflected light microscopy brought to the next level. The DisperTester 3000 Plus is the most advanced instrument for reliable filler dispersion analysis based on the superior compliance, reproducibility and repeatability well known from the DisperTester 3000 series.
MCool-40 / MCool-10 low-temperature cooling system
From viscous to elastic, from latex to composites, the MonTech Rubber Process Analyzer D-RPA 3000 can analyze the dynamic mechanical properties for a wide Phase Shift TanDelta range of rubber, elastomers and other viscoelastic materials. The sample is compressed in a closed die cavity between two biconical heated dies - a high-force direct drive torque motor mounted to the lower die generates a dy
MDR 3000 Professional Moving Die Rheometer
Entry model instrument in the Rubber Process Analyzer (RPA) technology. The MDR 3000 Prof. can be operated either in static testing mode (MDR) or also in dynamic testing mode (RPA).
MDR 3000 Moving Die Rheometer
The MDR 3000 is the industry standard for measuring the viscoelastic properties of polymers and elastomeric compounds before, during and after cure. The acquired data is gives advanced information about processability, cure characteristics, cure speed, as well as the behavior of the compound after-cure at fixed, user selectable strain rates.
Moving Die Rheometer Automation Options
All MonTech Moving Die Rheometers as well as Rubber Process Analyzers can be easily automated, allowing customers to increase productivity and release operators for other important tasks.
MonControl Analyses Software for testing instruments
The most easy-to-use and versatile instrument control software
MonQuality Laboratory Information Management System LIMS
A fully integrated Laboratory Information Management System
MonRecipe - Software for Compound and Material management
Bringing consistency and traceability to your Compound and Recipe development processes
MonStat - Statistical Process Control (SPC) Software
The innvoative Statistical Process Control (SPC) and reporting solution
Mooney Viscometer cooling, data and productivity options
Expand measurement capabilities and increase instrument flexibility with MonTech's unique instrument options: Cooling options Pneumatic cooling system Both test dies are cooled separately by a PID-controlled forced air cooling system. This system can be used to rapidly cool the Viscometer from a higher testing temperature (e.g. testing Mooney Scorch at 160°C) to a lower testing temperature (e.g. M
MV 3000 Basic Mooney Viscosimeter
A rotational shear viscometer according to Mooney for performing Viscosity tests (ML / MS 1+X), Stress Relaxation testing, Mooney Scorch, Delta Mooney testing on polymers as well as rubber compounds for quality control, research and development applications.
MV 3000 Mooney Viscosimeter
Standard instrument for QC and R&D testing according to international standards.
Online Testing Cell
MonTech's Online Rubber Testing Cell is the most advanced and only true automated testing solution for high-capacity mixing operations. With Online Testing Cells installed on over 90+ mixing lines globally, MonTech is the world's expert and leader in automated testing technology.
PO 3000 Plasticity
The MonTech ageing oven for plasticity testing ages rubber in accordance with international testing standards. In conjunction with the MonTech Plastimeter, it allows the user to determine the Plasticity Retention Index (PRI) of raw natural rubbers.
Precision testing film
MonTech advanced testing films Films available from stock include: have been precisely developed and are typically used for Rheometers, Pre-cut sheets of Polyester films for Rheometer and Mooney testing: Supplied with or without separation paper in several formats readily Mooney Viscometer testing applications as well as cure wrapping and available. Optionally also available with center-borehole
Rheometer advanced instrument options
Cooling systems Pneumatic cooling system Both chambers are cooled separately by a PID-controlled forced air cooling system. In MDR mode this system can be used to rapidly cool the instrument from a higher to any lower testing temperature and therefore significantly reduce non-productive time of the instrument as well as shorten stabilization and operator waiting times. Forced air cooling systems e
Rheometer data and productivity options
Increase productivity and efficiency of your testing system with MonTech's unique data and productivity options: Data / IT options Productivity options Integrated Industial computer Enhanced instrument protection From harsh mixing plants to cleanrooms, special environments Explosive, corrosive, cleanroom or other critical environments demand special encapsulation and protection of the computer are
MonTech Rheometer test die geometries
MonTech quick change test dies for Rheometers - are waiting your testing challenge! Offering the largest test dies selection in the market available test die geometries include 8 types according to different international and industry standards as well as over 30 application specific die designs. This allows the combination of dies in many different test setups such as double cone, plate-cone and
Traceable calibration torque standards
MonTech offers a full range of high precision, internationally traceable reference calibration standards for instrument calibration and verification purposes. Torque calibration standard MonTech’s advanced, fully elastic torsion torque standards have been specially developed for the highest calibration precision of Moving Die Rheometers. Compression as well as clamping types are available. Torque
V-MV 3000 Mooney Viscosimeter
High-end instrument for QC as well as dynamic R&D testing with maximum flexibility featuring variable rotor speed and temperature sweeps as well as block programming with multi-step stress relaxation.
RP 3000 Plasticity
The MonTech Rapid Plastimeter measures the plasticity, flow and viscosity of polymers and unvulcanized rubbers. The instrument is typically used in conjunction with the MonTech Ageing oven AO 3000 for plasticity testing to determine the Plasticity Retention Index (PRI) of raw natural rubbers.
Disper Tester 3000 Dispersion
The MonTech DisperTester 3000 is the most easy to use instrument for filler dispersion analysis; providing superior compliance, reproducibility and repeatability. The DisperTester provides accurate, repeatable results in seconds for both vulcanized and uncured rubber compounds that are applicable to the process, allowing quick and easy testing of dispersion compared to other optical techniques which often take hours to perform.
การเสื่อมสภาพและความทนทาน
8 รายการ
AO 3000 Ageing
MonTech AO 3000 forced ventilation cabinet ageing ovens are designed for precision ageing of polymer materials and rubber parts, products and components. The units - based on Memmert UF series - are adapted by MonTech with specific adjustments and calibrations to meet the specific requirements for the rubber industry as per ISO 188, ASTM D 573 and other applicable standard.
BO 3000
The BO 3000 oven with 4 test cells is designed for precision air and immersion ageing of rubber samples and parts up to 250°C in accordance with ISO 188, ISO 1817 ASTM D 471 and ASTM D 865. Ageing properties are considered key material parameters for rubber formulations - in order to meet the needs of your materials and application environment, the BO 3000 provides the ideal platform for accelerat
no image
CC 3000 Instrumented
Wear testing for offroad applications redefined - the all new instrumented Cut and Chip Tester CC 3000 The new instrumented version of the CC 3000 boost cut and chip testing to the next level! Besides variable spindle speeds this new version allows a precise, closed-loop control of the chipping forces (50 to 500N) as well as a multi directional force measurement of chipping and friction forces and
CC 3000 Abrasion
The MonTech CC 3000 Cut and Chip Test provides a simple, quick laboratory method to evaluate cutting and chipping resistance of rubber compounds subjected to harsh mechanical environments.
CS 3000 Compression set
For compression set testing according to ISO 815, DIN 53517, ASTM D395 and other International Standards, the CS 3000 compression set fixtures enable measurements of a rubber compound's ability to return to its original thickness after prolonged compressive stresses.
TGD 3000 Compression set
The TGD 3000 thickness gauge is a cost efficient and easy to use instrument for measuring the thickness of rubber of rubber-like materials. The constant force enables repeatable readings.
OB 3000 & WB 3000 Ageing
Oil- and waterbaths are unparalleled in terms of precision, safety and comfort and perfectly suited for professional heat and immersion ageing of natural or synthetic rubber, silicones and other elastomers. The units - based on Memmert ONE series - are adapted by MonTech with specific adjustments, fixtures, sample holders and calibrations to meet the specific requirements for the rubber industry.
ABR 3000 Abrasion
The MonTech ABR 3000 abrasion tester is a tear testing instrument for determination of an elastomer's resistance to frictional loss, using a rotating or fixed specimen in accordance with DIN 53516, DIN ISO 4649, AS1683.21 and ASTM D 5963. The test specimen is fixed into a quick clamp sample holder and precisely guided - either with or without rotation - over a predefined distance of either 20 or 40 Meters, with a defined load on a sheet of abrasive paper mounted to a stainless steel rotary drum of 150 mm diameter. Finally, the frictional loss is calculated by comparing the sample weight before and after testing.
เตรียมชิ้นงานและเครื่องอัด
26 รายการ
CP 3000 Auto Bale Cutters
The CP 3000 Auto is the most efficient way to get your sample preparation and cutting done! Whether for synthetic or natural rubber bales this cutting system is the most efficient solution for sample feeding and preparation.
CP 3000 Compact Bale Cutters
The laboratory bale cutter CP 3000 provides the most convenient solution to cut and slice polymers bales, blocks and rubber sheets. Fitted with a two-hand safety operation system, optional automatic knife cover and feeding tunnel the unit provides utmost operator convenience meeting highest safety standards.
Universal sample Cutting knives and Dies
All cutting dies are available as single, double, triple or multi dies. - Example configuration
Laboratory curing moulds
MonTech Precision Curing moulds - General Overview and Introduction In our inhouse mould-making shop MonTech manufactures a comprehensive range of precise and durable sample curing moulds according to ISO, DIN, ASTM and GB standards in various different versions. MonTech curing moulds guarantee easy handling and accurate moulding results. The molds are available with single or multiple cavities, h
LP 3000 – 1000kN L Laboratory press
The LP 3000 1000kN L is a high-capacity floor standing hydraulic laboratory press for high performance curing and preparation of rubber samples. Capable of producing up to 1000kN of compression force, this model is designed in accordance with ISO, ASTM, DIN, GB and other international standards for temperature uniformity, parallelism and safety.
LP 3000 – 1000kN Laboratory press
The LP 3000 1000kN is a high-capacity floor standing hydraulic laboratory press for high performance curing and preparation of rubber samples. Capable of producing up to 1000kN of compression force, this model is designed in accordance with ISO, ASTM, DIN, GB and other international standards for temperature uniformity, parallelism and safety. 196 x 196 mm to 596 x 596 mm and maximum press forces of 20 to 150 tons (200 to 1500kN) a matching system is available for almost any application and capacity requirement.
LP 3000 – 1500kN Laboratory press
The 1500 kN rubber laboratory press is designed to accommodate larger molds and lighter scale production. Featuring the best insulation, platen parallelism, heat stability and data collection software, the 1500kN press is compliant to the strictest laboratory press standards making it the top-tier press for R&D.
LP 3000 – 200kN Laboratory press
The LP 200kN press is a medium sized benchtop hydraulic laboratory press for high performance curing and preparation of rubber samples. Capable of producing up to 200kN of compression force, this model is designed in accordance with ISO, ASTM, DIN, GB and other international standards for temperature uniformity, parallelism and safety.
LP 3000 – 600kN Laboratory press
The LP 600kN is a high-capacity hydraulic laboratory press for high performance curing and preparation of rubber samples. Capable of producing up to 600kN of compression force, this model is designed in accordance with ISO, ASTM, DIN, GB and other international standards for temperature uniformity, parallelism and safety.
M-VS 3000 Specimen preparation
The M-VS 3000 Mooney volumetric sample cutter enables higher accuracy, repeatability and optimized testing results in Mooney Scorch and Viscosity testing by preparing test samples with a constant volume. The M-VS 3000 also features automatic cutting of a center hole for the rotor shaft along with a time delay for compressing.
NC 3000 Die and Sample cutting
The tabletop NC 3000 has specifically been designed for slitting samples for tear testing with a precision nick according to the requirements of ISO 34 die B, ISO 34 die C and ASTM D624 die B.
P-VS 3000 Compression former
ompression former / arallel cu er ech P- 3000 ompression former Mon ech P- 3000 Para pneumatic sample former for “press to shape” Universal pneumatic sample cutter with large working area and parallel guided crosshead P-VS 3000 Compression former has been specifically designed for pressing The P-VS 3000 Para has been designed for versatile applications to prepare forming of specimens from e.g. pel
P-VS 3000 L Plus
ech P- 3000 Mon ech P- 3000 Plus Mon ech P- 3000 trip pneumatic sample High-force pneumatic sample Guillotine strip cutting with larger working area cutter with larger working are arge universal sample cutter arge and strong universal sample cutter trip sample cutter an extended working area to easily handle designed for large format slabs, hard materials and designed for cutting strips and stripe
P-VS 3000 L
ech P- 3000 Mon ech P- 3000 Plus Mon ech P- 3000 trip pneumatic sample High-force pneumatic sample Guillotine strip cutting with larger working area cutter with larger working are arge universal sample cutter arge and strong universal sample cutter trip sample cutter an extended working area to easily handle designed for large format slabs, hard materials and designed for cutting strips and stripe
P-VS 3000 M Die and Sample cutting
The P-VS 3000 M Lever Press assures constant accuracy and precise cutting results. The cutter can conveniently be used for all types of ASTM, ISO, DIN, JIS cutting dies for all kind of samples made from rubber, leather and paper. It allows easy, quick and convenient sampling with simplified operation.
P-VS 3000 Para
ompression former / arallel cu er ech P- 3000 ompression former Mon ech P- 3000 Para pneumatic sample former for “press to shape” Universal pneumatic sample cutter with large working area and parallel guided crosshead P-VS 3000 Compression former has been specifically designed for pressing The P-VS 3000 Para has been designed for versatile applications to prepare forming of specimens from e.g. pel
P-VS 3000 Plus
Direct actuated sample cutter for multiple-blade cutting station knives or tough materials requiring high cutting forces. Whenever there is a need to save time and increase productivity by cutting multiple samples at the same time, P-VS 3000 is the ideal sample cutter. Equipped with 2-hand anti-tie down control and completely pneumatic operation, sample cutting is made easy and safe. The cutting f
P-VS 3000 Strip
ech P- 3000 Mon ech P- 3000 Plus Mon ech P- 3000 trip pneumatic sample High-force pneumatic sample Guillotine strip cutting with larger working area cutter with larger working are arge universal sample cutter arge and strong universal sample cutter trip sample cutter an extended working area to easily handle designed for large format slabs, hard materials and designed for cutting strips and stripe
P-VS 3000 Die and Sample cutting
P-VS 3000 Universal sample cutter for fast and precise preparation of sample test specimens for tensile tests and all other DIN, ISO and ASTM standard sample shapes from rubber, elastomers, foam rubber, plastic lms, foils and paper. Any type of cutting knife can be used with the P-VS 3000 sample cutter. Knives can be changed in seconds and cutting height can easily be adjusted.
P-VS plus 15 kN Die and Sample cutting
Universal sample cutter for multiple-blade cutting station knives or tough materials requiring high cutting forces. Whenever there is a need to save time and increase productivity by cutting multiple samples at the same time, P-VS 3000 is the ideal sample cutter.
R-VS 3000 Specimen preparation
The R-VS 3000 Rheometer volumetric sample cutter with an all new C-frame design accessibility to the cutting area along with the overall stability of the cutter has been improved.
RC 3000 Ring cutter
ech R 3000 Ring cutter special RC 3000 “Ring cutter” version has been designed for the accurate preparation of Ring shaped specimens from cured sheets. Various precision die configurations according to e.g. ISO 37, DIN 53504 and ASTM D 412 are available. RC 3000 is equipped with 3 or 4 cutting stations allowing the echnical specification preparation of two ring samples or a single sample with from
VP 3000 Laboratory press
The MonTech VP 3000 and LP 3000 are specifically designed for rubber applications and have evolved into the international standard in laboratory presses in the rubber industry.
VS 3000 Specimen preparation
The VS 3000 universal constant volume cutter is the ideal and reliable sample preparation tool for applications that require constant volume samples such as preforms for moulding operations. The VS 3000 sample cutter can be tted with knives of any diameter between 20 and 60mm per customer requirements, making the cutter an ideal tool for easy preform preparation.
CP 3000 Bale Cutters
The laboratory bale cutter CP 3000 provides the most convenient solution to cut and slice polymers bales, blocks and rubber sheets. Fitted with a two-hand safety operation system, optional automatic knife cover and feeding tunnel the unit provides utmost operator convenience meeting highest safety standards.
LP 3000 – 400kN Laboratory press
MonTech rubber lab press series, including the LP 400 kN, features the high performance components for 27/7 curing and preparation of rubber samples. The 400 kN unit is designed in accordance with ISO, ASTM, DIN, GB and other international rubber press standards for unmatched temperature uniformity, parallelism and safety.
ความแข็งและความหนาแน่น
13 รายการ
DM 3000 Density
Densimeter for testing of individual samples with automated test sequence and internal self-calibration
HT 3000 Auto Rotation Five Hardness
Automatic test stand with motorized hardness head movement and continuous multi sample automation by integrated rotary tray. Multiple readings per sample with average or median calculation. Simplified single button operation, different centering masks for various sample and product shapes are optionally available.
HT 3000 Auto Rotation Single Hardness
Automatic test stand with motorized hardness head movement and single sample automation by rotating sample platform. Multiple readings per sample with average or median calculation. Simplified single button operation and optional centering masks.
HT 3000 Auto Hardness
Automatic test stand with motorized hardness head movement Single button operation and integrated power supply, controlled indentation speed acc. standards Optional: variable indentation speed, Pass/Fail indicator light
HT 3000 Chamber Hardness
The HT 3000 Chamber consists of an all-stainless 240 Liter measuring chamber available
HT 3000 Manual Hardness
Manual test stand with simplified lever operation Integrated height adjustment and adjustable test surface
HT 3000 Modular Tack & Force testing system
The revolutionary HT 3000 Modular Tack testing system is a new, highly efficient and reliable procedure for the determination of the tackiness of rubber materials. Designed for a variety of applications – not only for the tire industry – the system is capable of determining the tackiness / autohesion (static friction force) rubber and polymer materials. Tack testing allows to precisely distinguish
HT 3000 Modular Hardness
HT 3000 Modular Flexible and adaptable Hardness testing Modular
HT 3000 Hardness
Hardness (resistance to indentation) is one of the most important properties of rubber products and parts. MonTech therefore offers a full range of handheld and benchtop precision hardness testers according to various scales and standards.
Physical testing automation solutions
Can keep up with testing? Samples everywhere? We’ve got you covered with our intelligent solutions! Besides a complete range of standalone or production integrated automation solution MonTech can tailor automated testing for your parts and laboratory space. Utilizing latest industrial automation technology our system provide a solid testing platform generating reliable results with a short return
RB 3000 Rebound Resilience
The RB 3000 automatic Rebound Resilience tester allows the determination of the resilience properties of rubber and elastomeric materials according to DIN 53512, ISO 4662, ASTM D 1054 and ASTM D 7121. Rebound resilience is defined as the relation between the returned and the impact energy between the hammer with its fin, the specimen and the instrument. The samples used for testing are typically rubber and elastomeric materials as buttons or strips in a hardness range of 30 to 85 Shore A / IRHD N.
RD 3000 Density
The RD 3000 compression density tester provides a simple and convenient way to determine the density of raw polymers, masterbatches and uncured rubber compound specimens of any shape or geometry. The instrument features an integrated precision scale for accurately measuring the weight of the specimen. In a second step, all air trapped in the sample is removed by compressing the material in a massive barrel - once stabilized - allows the volume to be determined. Once the test sequence is finished the density is automatically calculated and displayed on the integrated touchscreen. Optionally the instrument can be controlled and test results can be remotely acquired by the MonDevice software system.
H&D 3000 Density
2 instruments in 1: With the MonTech H&D 3000, hardness AND density testing of cured rubber samples is made simple, fast and reliable. Arbitrary test sequences are easily pre-programmed, samples are sequentially processed and test data is automatically collected, without the need for operator involvement. Due to the unique rotary tray design, no manual magazine handling is needed; the instrument can be continuously loaded and operated.
