- ISO 12192
- JIS P8126
- ISO 3035
- JIS Z0403-1
- ISO 3037
- JIS Z0403-2
Ring Crush Test (RCT) | Strograph™ E with RCT Jig | 210
Toyo Seiki · Tensile / Compression / 3-Point Bend / Peel
Strograph™ E line is a most cost effective single column tabletop universal testing machine (UTM) with a maximum force capacity of 1kN which is suitable for testing tensile, compression, bending, peeling, friction etc. of various kinds of materials such as plastic film, elastomer, textile, paper etc. Ring Crush Test (RCT) can be performed by replacing the jig.
Datasheets
Specification
| ISO 12192 (JIS P 8126) | Paper and board-Determination of compressive strength-Ring crush method |
|---|---|
| ISO 3035 (JIS Z 0403-1) | Corrugated fibreboard− / Determination of flat crush resistance |
| ISO 3037 (JIS Z 0403-2) | Corrugated fibreboard− / Determination of edgewise crush resistance |
| Model | E3-S |
| Load cell capacity | 1kN max. |
| Effective stroke / (using J-3 chuck, approx.) | 330mm |
| Speed range | 0.05 to 1500mm/min. |
| Power supply | Single-phase, AC100 to 115V, 50/60Hz, 0.3kVA / Single-phase, AC200 to 230V, 50/60Hz, 0.3kVA / (to be selected) |
| Dimensions | W435 × D460 × H900mm |
| Weight (approx.) | 47kg |
| Lower Compression Plate / (upper plate is included) | JIG-B |
| Ring Crush Test (RCT) Jig | RING-V |
| Flat Crush Test (FCT) Jig | FLAT-V |
| Edge/End Crush Test (ECT) Jig | END-V |
| PC and testing software* | CON* |
| Testing software* | WD* |
| Software for Ring Crush Test (RCT)* | WD-RNG* |
Model comparison
| Item | Value |
|---|---|
| ISO 12192 (JIS P 8126) | Paper and board-Determination of compressive strength-Ring crush method |
| ISO 3035 (JIS Z 0403-1) | Corrugated fibreboard− / Determination of flat crush resistance |
| ISO 3037 (JIS Z 0403-2) | Corrugated fibreboard− / Determination of edgewise crush resistance |
Scroll the table sideways for every column
| Item | Value |
|---|---|
| Model | E3-S |
| Load cell capacity | 1kN max. |
| Effective stroke / (using J-3 chuck, approx.) | 330mm |
| Speed range | 0.05 to 1500mm/min. |
| Power supply | Single-phase, AC100 to 115V, 50/60Hz, 0.3kVA / Single-phase, AC200 to 230V, 50/60Hz, 0.3kVA / (to be selected) |
| Dimensions | W435 × D460 × H900mm |
| Weight (approx.) | 47kg |
Scroll the table sideways for every column
| Item | Value |
|---|---|
| Lower Compression Plate / (upper plate is included) | JIG-B |
| Ring Crush Test (RCT) Jig | RING-V |
| Flat Crush Test (FCT) Jig | FLAT-V |
| Edge/End Crush Test (ECT) Jig | END-V |
| PC and testing software* | CON* |
| Testing software* | WD* |
| Software for Ring Crush Test (RCT)* | WD-RNG* |
Scroll the table sideways for every column
