- ISO 289: 2018
- ASTM D1646
- ASTM D 3346
- DIN 53523
- BS 903
- AFNOR T43-00
- BS 1673
- GOST 10722-76
- JIS K6300
- DIN 53523 Part 4
- AFNOR T43-00/005
- TGL 25-689
V-MV 3000 Mooney Viscosimeter
MonTech · Mooney Viscosimeter
High-end instrument for QC as well as dynamic R&D testing with maximum flexibility featuring variable rotor speed and temperature sweeps as well as block programming with multi-step stress relaxation.
Datasheets
- MonTech General Cataloguemontech-product-catalogue-2023.pdfDownload PDF
- MonTech Specimen and Die cuttingmontech-specimen-and-die-cutting-2021.pdfDownload PDF
- V-MV 3000 datasheetmooney-viscometer-2021-1.pdfDownload PDF
Specification
| International standards | ISO 289:2018, ASTM D 1646, ASTM D 3346, DIN 53523, BS 903: Part 58, AFNOR T43-00/005, BS 1673, GOST 10722-76, JIS K6300, TGL 25-689, ... |
|---|---|
| Test modes | Mooney Viscosity, Mooney Scorch, Stress Relaxation, Mould release, Delta Mooney Mooney Variable Viscosity, Variable test sequence block programming Multi-step stress relaxation |
| Rotor | Large (38.10 mm) and Small (30.48 mm) Sealed, with longlife seals |
| Rotor speed | 0.00 to 50.00 turns per minute, 0.01 steps (0 to 5.25 rad / sec) |
| Stress Relaxation | According to ISO 289:2018, DIN 53523 Part 4 |
| Temperature control system | Ambient to 232 °C, precision +/- 0.03 °C, digital, microprocessor controlled |
| Units | Mooney - units (MU), Temperature (°C, °F), Time (min - min / min - sec) |
| Closing force | 11.5 kN |
| Die configuration / Rotor | According to international standards large (ø 38.1 mm) and small (ø 30.48 mm) Rotor |
| Force measurement | High precision in-line torque transducer |
| Torque range | 0.01 to 230 MU |
| Sample volume | Two specimens having a combined volume of 25 cm³ |
| Temperature check system | Recordings of the temperature gradient on the screen, PID microprocessor monitored |
| Calibration | Fully automatic by built-in calibration weights, Software guided |
| Data Interface | Ethernet (10/100 MBit), USB (int.), CF card (int.), RS232 (opt.) |
| Data points | Over 3500 data points available Including: Initial viscosity, ML / ML 1+X, Y+X+Z, Scorch viscosities and cure times, Stress Relaxation (log-log), Slope, Intercept, Regression coefficient, Multi-zone Stress Relaxation |
| Pneumatics | min. 4.5 Bar / 60 psi |
| Electrical | 200 -240 V, 6 Amps, 47-63 Hz, Single phase |
| Instrument options | - Instrument control panel with 5" touchscreen display and printer - Easy access and encapsulated electronic system - Rotor detection - Reinforced drive shaft and rotor to 300MU - Double channel forced air cooling system - Low-temperature cooling system MCool 10 - M-VS 3000 constant volume sample cutter |
| Measured data | Mooney - value (MU) Temperature (°C, °F) Time (min - min / min - sec / sec) |
