- ISO 293
Fine Labo Press | 694
Toyo Seiki · Specimen Preparation
In order to permit reliable sample formation not possible with conventional machine, the Fine Labo Press, incorporates automatic deforming operation and a mechanism for cooling at constant rate by controlling the flow of cooling water to control the cooling rate. Related standards
เอกสารดาวน์โหลด
ข้อมูลจำเพาะ
| Model | SAP-1 |
|---|---|
| Pressure | 100kN to 500kN |
| Dimensions of heating plate | 300 × 300mm |
| Stroke | 100mm |
| Temperature range | RT+25°C to 300°C |
| Heating system | Electrical (SSR control) |
| Temperature control | Digital system, PID control |
| Preheat time | Max. 99min.59sec. |
| Molding time | Max. 99min.59sec. |
| Deairing time | 0 to 60sec. |
| Dearing frequency | 0 to 99times |
| Average cooling rate | 10±5°C/min. or 15±5°C/min. |
| Power requirement | Three-phase, AC200V, 50/60Hz, 30A (SAP-1 mainbody) / Three-phase, AC200V, 50/60Hz, 30A (Hydraulic unit) |
| Compressed air requirement | 0.4MPa, 10L/min. |
| Cooling water requirement | 25L/min. (Minimum pressure 0.15MPa) |
| Hydraulic unit noise level | Max. 73dB |
| Dimensions | W1170 × D660 × H1435mm (SAP-1 mainbody) / W925 × D630 × H1100mm (Hydraulic unit) |
| Weight | Approx. 600kg (SAP-1 mainbody) |
| ISO 293 | Plastics — Compression moulding of test specimens of thermoplastic materials |
ตารางเปรียบเทียบรุ่น
| Item | Value |
|---|---|
| Model | SAP-1 |
| Pressure | 100kN to 500kN |
| Dimensions of heating plate | 300 × 300mm |
| Stroke | 100mm |
| Temperature range | RT+25°C to 300°C |
| Heating system | Electrical (SSR control) |
| Temperature control | Digital system, PID control |
| Preheat time | Max. 99min.59sec. |
| Molding time | Max. 99min.59sec. |
| Deairing time | 0 to 60sec. |
| Dearing frequency | 0 to 99times |
| Average cooling rate | 10±5°C/min. or 15±5°C/min. |
| Power requirement | Three-phase, AC200V, 50/60Hz, 30A (SAP-1 mainbody) / Three-phase, AC200V, 50/60Hz, 30A (Hydraulic unit) |
| Compressed air requirement | 0.4MPa, 10L/min. |
| Cooling water requirement | 25L/min. (Minimum pressure 0.15MPa) |
| Hydraulic unit noise level | Max. 73dB |
| Dimensions | W1170 × D660 × H1435mm (SAP-1 mainbody) / W925 × D630 × H1100mm (Hydraulic unit) |
| Weight | Approx. 600kg (SAP-1 mainbody) |
เลื่อนตารางไปทางข้างเพื่อดูทุกคอลัมน์
| Item | Value |
|---|---|
| ISO 293 | Plastics — Compression moulding of test specimens of thermoplastic materials |
เลื่อนตารางไปทางข้างเพื่อดูทุกคอลัมน์
