- ISO 1183-1
- ISO 1817
- ISO 2781
- ASTM D297
- ASTM D792
Semi-Automatic Density Tester for Plastics and Rubber / Automatic Densimeter | 265-DSG-2
Toyo Seiki · Thickness / Hardness / Density
This high precision digital densimeter for polymers or plastics is ideal for almost any laboratory environment. ● Automatic Weighing : The weighing operation is fully automatic, and the density is calculated and displayed on the screen. ● Versatile : It can measure the density of solids, liquids, and even the rate of volume change.
เอกสารดาวน์โหลด
ข้อมูลจำเพาะ
| ISO 1183-1 | Plastics — Methods for determining the density of non-cellular plastics — Part 1: Immersion method, liquid pycnometer method and titration method |
|---|---|
| ISO 2781 | Rubber, vulcanized or thermoplastic — Determination of density |
| ASTM D792 | Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement |
| Model | DSG-2 |
| Measurement method | Immersion / hydrostatic weighing |
| Capacity | 100g |
| Calibration weight | Built-in |
| Resolution | 0.00001g (0.01mg) / 0.000001g/cm3 |
| Operation panel | 4.7 in LCD touch screen |
| Dipping speed | 10, 20, 30mm/s (variable) |
| Data saving | Max. 1000 data |
| Output interfaces | USB (x1), RS232C (x1, for small printer) |
| Electrical | • Single-phase, AC100-240V, 50/60Hz, 0.1kVA (Main unit) / • Single-phase, AC100-240V, 50/60Hz, 0.1kVA (Balance unit) |
| Dimensions | W290 × D443 × H900mm (including balance unit) |
| Net weight (approx.) | 35kg (including balance unit) |
| Scope of delivery | • DSG-2 main unit / • Balance unit / • Standard beaker / • Sample clamps (pierce x1, ohm x3) |
| Options | • Various sample clamps / • Automatic correction of water/air density (temperature sensor) / • Double-wall beaker for constant temperature water supply (note: external chiller is required) / • Volume change measurement (add-on program) / • Expansion ratio measurement (add-on program) / • Liquid density measurement (add-on program, glass ball clamp and small beaker) / • Data export software / • Small thermal printer / • Calibration certificate with traceability |
ตารางเปรียบเทียบรุ่น
| Item | Value |
|---|---|
| ISO 1183-1 | Plastics — Methods for determining the density of non-cellular plastics — Part 1: Immersion method, liquid pycnometer method and titration method |
| ISO 2781 | Rubber, vulcanized or thermoplastic — Determination of density |
| ASTM D792 | Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement |
เลื่อนตารางไปทางข้างเพื่อดูทุกคอลัมน์
| Item | Value |
|---|---|
| Model | DSG-2 |
| Measurement method | Immersion / hydrostatic weighing |
| Capacity | 100g |
| Calibration weight | Built-in |
| Resolution | 0.00001g (0.01mg) / 0.000001g/cm3 |
| Operation panel | 4.7 in LCD touch screen |
| Dipping speed | 10, 20, 30mm/s (variable) |
| Data saving | Max. 1000 data |
| Output interfaces | USB (x1), RS232C (x1, for small printer) |
| Electrical | • Single-phase, AC100-240V, 50/60Hz, 0.1kVA (Main unit) / • Single-phase, AC100-240V, 50/60Hz, 0.1kVA (Balance unit) |
| Dimensions | W290 × D443 × H900mm (including balance unit) |
| Net weight (approx.) | 35kg (including balance unit) |
| Scope of delivery | • DSG-2 main unit / • Balance unit / • Standard beaker / • Sample clamps (pierce x1, ohm x3) |
| Options | • Various sample clamps / • Automatic correction of water/air density (temperature sensor) / • Double-wall beaker for constant temperature water supply (note: external chiller is required) / • Volume change measurement (add-on program) / • Expansion ratio measurement (add-on program) / • Liquid density measurement (add-on program, glass ball clamp and small beaker) / • Data export software / • Small thermal printer / • Calibration certificate with traceability |
เลื่อนตารางไปทางข้างเพื่อดูทุกคอลัมน์
